基于模型驱动构件库的飞行控制软件工厂研究  

Flight Control Software Factory Based on Model Driven Component Library

作　　者：陈宣文[1] 马超[1] 马倩[1] 孟强 CHEN Xuan-wen;MA Chao;MA Qian;MENG Qiang(AVIC Xi'an Aeronautics Computing Technique Research Institute,Xi'an 710068,China)

机构地区：[1]航空工业西安航空计算技术研究所,陕西西安710068

出　　处：《测控技术》2023年第2期108-115,共8页Measurement & Control Technology

基　　金：航空科学基金项目(2018ZC31003)。

摘　　要：针对飞行控制软件日趋紧张的型号进度和快速增长的代码规模,首先,提出了基于模型驱动构件库开发飞行控制软件的基本概念,并与传统软件开发方法进行了对比分析;然后,针对飞行控制软件快速开发的需求,根据构件的设计准则,对飞行控制软件功能、性能、软件和硬件组成、接口关系进行领域工程建模;对飞行控制软件的共性通用部分和型号定制部分解耦后进行分层和领域构件化分析,建立了软件工厂模式的开发平台框架;最后,详细讨论了基于模型驱动构件库的软件工厂实现和维护的关键技术。In view of the increasingly tense model schedule and rapidly growing code size of flight control software, the basic concept of developing flight control software based on model driven component library is proposed, and compared with traditional software development methods.Then, according to the requirements of rapid development of flight control software and the design criteria of components, domain modeling about the function, performance, composition of software and hardware, and interface relationship of flight control software are conducted.After decoupling the common part and model customization part of flight control software, the layered and domain component analysis is carried out, and the development platform framework of software factory mode is established.Finally, the key technologies of implementation and maintenance of software factory based on model driven component library are discussed in detail.

关 键 词：模型驱动 构件库 飞行控制软件 软件工厂 

分 类 号：V249[航空宇航科学与技术—飞行器设计] TP319[自动化与计算机技术—计算机软件与理论]