激光半主动制导半实物仿真系统零位标定方法  

Zero calibration method of maser semi-active guidance hardware-in-the-loop simulation system

作　　者：郝燕云 赵松庆[1,2] 吴根水 陈海燕[1] 李睿 HAO Yan-yun;ZHAO Song-qing;WU Gen-shui;CHEN Hai-yan;LI Rui(China Airborne Missile Academy,Luoyang 471009,China;Aviation Key Laboratory of Science and Technology on Airborne Guided Weapons,Luoyang 471009,China)

机构地区：[1]中国空空导弹研究院,河南洛阳471009 [2]航空制导武器航空科技重点实验室,河南洛阳471009

出　　处：《激光与红外》2023年第1期97-100,共4页Laser & Infrared

摘　　要：基于漫反射屏的激光半主动制导半实物仿真系统由漫反射屏、激光目标特性模拟激光器、二自由度目标视线运动模拟反光镜、激光干扰特性模拟激光器、二自由度干扰视线运动模拟反光镜、三自由度导弹飞行姿态模拟转台、仿真计算机和仿真总控系统等组成,各分系统工程研制完成后,需要确定各分系统的安装位置和方向。本文主要总结了各分系统安装定位方法和零位标定方法,对类似系统的建设具有指导意义。The laser semi-active guidance hardware-in-the-loop simulation system based on diffuse reflection screen consists of a diffuse reflection screen, a laser target simulator, 2D of target line-of-sight motion simulated reflectors, a laser jamming simulator, a 2D of jamming line-of-sight motion simulated reflectors, a 3D of missile flight motion simulator, a simulation computer and a simulation master control system. After the development of each subsystem project is completed, it is necessary to determine the location and direction during installation of each subsystem. In this paper, the main summary of the method of installation, positioning and zero calibration of each part is given, which is a guide for the construction of similar systems.

关 键 词：漫反射屏 激光 半实物仿真 安装定位 零位标定 

分 类 号：TJ765.4[兵器科学与技术—武器系统与运用工程]