基于响应面法的水导激光加工碳纤维复合材料工艺参数优化  

Optimization of Process Parameters for Water-jet Guided Laser Processing of CFRP Based on Response Surface Model

作　　者：唐文翰 孙冬[1] 韩福柱[1] TANG Wenhan;SUN Dong;HAN Fuzhu(Beijing Key Lab of Precision/Ultra-precision Manufacturing Equipments and Control,Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China)

机构地区：[1]清华大学机械工程系,北京市精密/超精密制造装备及控制重点实验室,北京100084

出　　处：《电加工与模具》2023年第1期44-49,共6页Electromachining & Mould

基　　金：国家重点研发计划重点专项(2018YFB1105900)。

摘　　要：为了更好地采用水导激光加工碳纤维复合材料,基于响应面法设计实验,研究了工艺参数对切割质量指标的影响规律和切割质量对工艺参数的敏感性,并以热影响区、锥度、有效切割速度为目标进行了优化。结果表明:激光峰值功率对热影响区和锥度的影响显著,而切割速度和切割次数对有效切割速度的影响显著;当在切割速度2.35 mm/s、激光峰值功率324.45 W、切割次数6次时,水导激光切割碳纤维复合材料表面质量较好。In order to get better processing quality of carbon fiber reinforced polymer by water-jet guided laser,experiments were designed based on response surface method. The influence of process parameters on cutting quality index and the sensitivity of process parameters from cutting quality were studied,and the optimization was carried out with the objectives of heat affected zone,taper angle and effective cutting speed. The result showed that the laser peak power has a significant effect on the heat-affected zone and taper angle,while the cutting speed and cutting time have a significant effect on the effective cutting speed. When the cutting speed is 2.35 mm/s,the peak laser power is 324.45 W and the cutting time is 6,the surface quality of cutting carbon fiber reinforced polymer by water-jet guided laser will be better.

关 键 词：水导激光 碳纤维复合材料 响应面 

分 类 号：TG665[金属学及工艺—金属切削加工及机床]