剑杆小样织机上机工艺参数对纬密的影响  

Influence of process parameters of sample tapier loom on weft density

作　　者：李宁 盛守祥 罗维新[2] 李兴华 吕建品[2] 樊伟力[2] 刘宝图[2] 郭冬梅 LI Ning;SHENG Shouxiang;LUO Weixin;LI Xinghua;LV Jianpin;FAN Weili;LIU Baotu;GUO Dongmei(Key Laboratory of New Dyeing Technology in Short Process of Shandong Province,Binzhou 256617,China;National Enterprise Technology Center,Huafang Co.Ltd.,Binzhou 256617,China;Huafang Engineering Technology Research Institute Limited of Binzhou,Binzhou 256617,China)

机构地区：[1]山东省短流程印染新技术重点实验室,山东滨州256617 [2]华纺股份有限公司技术中心,山东滨州256617 [3]滨州华纺工程技术研究院有限公司,山东滨州256617

出　　处：《染整技术》2023年第2期23-26,56,共5页Textile Dyeing and Finishing Journal

基　　金：2023年度省自然科学基金项目(ZR202211100035)。

摘　　要：针对剑杆小样织机的性能,对后梁高度、提综提前时间、经纱张力、打纬提前时间、钢筘停留时间等工艺参数进行调节,探究工艺参数的调节对织物纬密的影响,并探究出较优工艺,为大车生产提供参考依据。According to the performance of sample rapier loom,the influence of technological parameters on weft density was explored by adjusting the rear beam height,lifting advance time,warp tension,beating-weft advance time and steel drill residence time,and the better technology was explored to provide reference for the mass production.

关 键 词：剑杆小样织机 纬密 PA56 工艺参数 经纱张力 后梁高度 开口时间 

分 类 号：TS105[轻工技术与工程—纺织工程]