检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王鹏飞 徐宏阳 马辉[1,2] 杨阳 WANG Peng-fei;XU Hong-yang;MA Hui;YANG Yang(School of Mechanical Engineering&Automation,Northeastern University,Shenyang 110819,China;Key Laboratory of Vibration and Control of Aero-Propulsion Systems Ministry of Education,Northeastern University,Shenyang 110819,China;China North Vehicle Research Institute,Beijing 100072,China)
机构地区:[1]东北大学机械工程与自动化学院,辽宁沈阳110819 [2]东北大学航空动力装备振动及控制教育部重点实验室,辽宁沈阳110819 [3]中国北方车辆研究所,北京100072
出 处:《振动工程学报》2023年第1期116-127,共12页Journal of Vibration Engineering
基 金:国家重点研发计划项目(2020YFB2007802)。
摘 要:针对某履带车辆汇流行星排传动系统支撑轴承存在的安装不对中问题,建立了含轴承倾斜不对中的行星轮系⁃转子系统动力学方程。理论推导了可考虑球轴承分别处于内/外圈倾斜不对中故障条件下的轴承力模型。将该模型与行星轮系集中质量模型以及转子有限元模型耦合,得到了行星排传动系统动力学模型。分析了轴承不对中对系统动态特性的影响,并讨论了滚道曲率半径和轴承间隙等参数对系统动力学特性的演变规律。结果表明,倾斜不对中使轴承接触力急剧增大;接触角、接触刚度、轴承间隙产生周期性波动;变柔度振动频率幅值增大,系统振幅降低。提高滚道曲率半径和轴承初始间隙会增大变柔度振动。但适当选择较大的轴承间隙,可抵消轴承安装不对中造成的不利影响。Aiming at the misalignment problem of the support bearing in the planetary gear transmission system of a tracked vehi⁃cle,the equation of motion of the planetary gear-rotor system with bearing tilt misalignment was established.A bearing force mod⁃el was proposed based on the nonlinear Hertz contact theory,which could be considered when the ball bearing was respectively in the condition of inner/outer ring tilt misalignment.The proposed model was coupled with the lumped mass model of planetary gear and the finite element model of rotor,and the dynamic model of planetary gear transmission system was obtained.The influence of bearing misalignment on the system dynamic characteristics was analysed,and the evolution law of the parameters such as raceway curvature radius and initial bearing radial clearance on the system dynamic characteristics was further discussed.The results show that the bearing tilt misalignment lead to the sharp increase of bearing contact force,the periodic fluctuation of contact angle,con⁃tact stiffness and bearing clearance,the increase of varying compliance(VC)vibration frequency amplitude and the decrease of sys⁃tem amplitude.Enhancing the raceway curvature radius and bearing initial clearance can increase the VC vibration.However,the appropriate selection of large bearing clearance can offset the adverse effects caused by tilt misalignment of bearing installation.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63