基于微波无线传能与全向扫描天线的SSPS——OMEGA-2.0光机电集成设计  

Optomechatronics OMEGA design project of SSPS with MWPT and omnidirectional scanning antenna

作　　者：段宝岩[1] DUAN BaoYan(Research Institute on Mechatronics,Xidian University,Xi’an 710071,China)

机构地区：[1]西安电子科技大学机电科技研究所,西安710071

出　　处：《中国科学：技术科学》2023年第1期139-144,共6页Scientia Sinica(Technologica)

基　　金：国家自然科学基金重点项目(批准号:U1637207)资助。

摘　　要：针对欧米伽(OMEGA)空间太阳能电站设计方案存在的困难与问题,本文提出了一种新的称为OMEGA-2.0的光机电集成方案.首先,利用球冠接收平行太阳光能(SE),并将其汇聚于陀螺状的线馈源阵上,经光电转换部件生成直流电(DC)后,进而通过结构功能件将DC送到置于球冠聚光镜外部顶端的微波发射天线,这不仅可大大简化设计,且可破解对球面薄膜材料的关于太阳光半透射半反射和对微波全透明的难题,还可消除因发射天线在聚光镜内部引起的光线遮挡问题.然后,通过球冠聚光镜的结构功能件来输送高压巨功率直流电,可突破需经过电刷进行高压巨功率直流电传输的可靠性低的关键技术.其次,将空间电推进技术用于聚光镜在轨姿态微调,可攻克对线馈源运动进行在轨实时精密控制的难点.再者,在聚光镜背面、线馈源根部设计仿生的高效轻质辐射散热器,并进行拓扑与形状、尺寸优化设计,可进一步大幅度缓解散热压力.最后,引入全向扫描微波天线,可保证系统沿空间轨道运行时微波波束实时指向接收天线,从而避免需对发射天线进行实时大惯量指向控制的问题.Owing to the difficulties and shortcomings of the OMEGA design of the space solar power station,this study proposes an optomechatronics OMEGA design project.First,a spherical crown(instead of the whole sphere) is utilized to collect the parallel sunlight,which is focused on the top-shaped line feed.The DC energy is sent to the transmission antenna.Thus,the problem of designing a special membrane,which is semi-transmitting and semi-reflecting for the sunlight and meanwhile transparent for the microwave,could be avoided.Then,the electric brush with ultra-large DC power is replaced with the traditional DC transfer method to overcome the critical problem of lower reliability.Next,using the omnidirectional scanning antenna,an electric propulsion technique is introduced to adjust the crown pose to replace the control system of the line-feed moving.Afterward,employing a bionic butterflying technology with topology optimization to radiate the massive heat to the cold space resulted in an innovative cooler,checking for both requirements of a bigger radiation size and an ultra-low selfweight,simultaneously.

关 键 词：OMEGA-2.0光机电集成设计 电推进位姿调控 仿生辐射散热 全向扫描微波阵列天线 

分 类 号：TM615[电气工程—电力系统及自动化]