液压支架销轴连接接触应力及失效分析  

Analysis of Contact Stress and Failure of Pin Joint Connection of Hydraulic Support

作　　者：高宏伟 吕凯波 李健[2] 樊红卫[3] 苏成明[4] 钟宏宇 GAO Hongwei;LYU Kaibo;LI Jian;FAN Hongwei;SU Chengming;ZHONG Hongyu(School of Mechanical and Vehicle Engineering,Taiyuan University of Technology,Taiyuan Shanxi 030024,China;Huozhou Intelligent Remanufacturing Research Institute,Taiyuan University of Technology,Huozhou Shanxi 041000,China;School of Mechanical Engineering,Xi’an University of Science and Technology,Xi’an Shaanxi 710054,China;Shaanxi Tianyuan Intelligent Remanufacturing Co.,Ltd.,Xi’an Shaanxi 710065,China)

机构地区：[1]太原理工大学机械与运载工程学院,山西太原030024 [2]太原理工大学霍州智能再制造研究院,山西霍州041000 [3]西安科技大学机械工程学院,陕西西安710054 [4]陕西天元智能再制造股份有限公司,陕西西安710065

出　　处：《机床与液压》2023年第1期152-157,共6页Machine Tool & Hydraulics

基　　金：陕西省矿山机电装备智能监测重点实验室开放基金(SKL-MEEIM201904);国家自然科学基金(51805352)。

摘　　要：销轴连接是液压支架结构件的主要连接形式,其可靠性对液压支架的正常使用具有重要影响。基于赫兹接触理论,建立销孔处接触应力理论模型;采用ADAMS对液压支架各结构件受力分析,得到销孔受力情况;基于有限元法分析销孔处接触应力、变形及塑性应变。结果表明:在顶梁扭转、底座扭转工况下,销轴连接接触应力超过材料的屈服极限,其接触应力分布结果具有较强的非线性;销孔应力主要集中在销孔前端接触部位,销孔塑性应变集中在销孔前端接触部位,表现为挤堆效应,在正拉力下销孔两侧塑性应变更为明显。The pin joint connection is the main connection form of the hydraulic support structure,and its reliability has an important effect on the normal use of the hydraulic support.Based on the Hertz contact theory,a theoretical model of the contact stress at the pin hole was established;ADAMS was used to analyze the force of each structural member of the hydraulic support to obtain the force of the pin hole;the contact stress,deformation and plastic strain at the pin hole were analyzed based on the finite element method.The results show that under the torsion of the top beam and the base,the contact stress of the pin joint connection exceeds the yield limit of the material,and the contact stress distribution has a strong nonlinearity;the pin hole stress is mainly concentrated in the front contact part of the pin hole,the plastic strain of the hole is concentrated on the contact part of the pin hole,which shows the squeezing effect;under the positive tension,the plastic strain on both sides of the pin hole is more obvious.

关 键 词：液压支架 销轴连接 接触应力 失效分析 

分 类 号：TD355[矿业工程—矿井建设]