检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:邓经伟 慕丽[2] Deng Jingwei;Mu Li
机构地区:[1]沈阳理工大学机械工程系,辽宁沈阳110159 [2]沈阳理工大学,辽宁沈阳110159
出 处:《一重技术》2023年第1期45-47,17,共4页CFHI Technology
基 金:国家自然科学基金(No51875368)。
摘 要:为了去除结构化外圆沟槽减阻表面在磨削加工过程中产生的边界隆起毛刺等缺陷,改善沟槽交界处的形貌,提高沟槽表面的减阻能力,采用超精研抛光法对外圆沟槽进行抛光整形。探讨油石压力、工件线速度与油石振荡频率对抛光整形效果的影响。结果表明:提高油石压力、增加工件的线速度与油石震荡频率能提高超精研抛光整形的能力。In order to remove boundary uplift burrs and other defects formed while polishing surface of the outer circular structural drag reduction groove, improve the appearance of the groove junction, and enhance the drag reduction capacity of the groove surface, the ultra-fine polishing method is adopted for polishing and shaping of the outer circular groove. This paper also discusses the influence of whetstone pressure, workpiece linear velocity and whetstone oscillation frequency on polishing and shaping. The results show that the effect of ultra-fine polishing and shaping can be improved by increasing whetstone pressure, workpiece linear velocity and whetstone oscillation frequency.
分 类 号:TG51[金属学及工艺—金属切削加工及机床]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229