检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:黄茨 范晋文 唐焕奇 蔡觉正 Huang Ci;Fan Jinwen;Tang Huanqi;Cai Juezheng(China Electronics Technology Group Corporation No.58 Research Institute,Chengdu 610000,China;CSIC Hengyuan Technology Technology Co.,Ltd.)
机构地区:[1]中国电子科技集团公司第五十八研究所,成都610000 [2]中国船舶重工集团衡远科技有限公司
出 处:《单片机与嵌入式系统应用》2023年第3期88-91,共4页Microcontrollers & Embedded Systems
摘 要:设计了一种基于软硬件双重保障的RTC电池电量监测电路,在硬件上设定低压检测阈值,利用比较器将电池电压与阈值电压进行比较,从而判断电量状态,在软件上监测和记录RTC电池工作时间,与评估的电池理论工作时间进行对比后判断电量状态。软硬件上只要其中一种方式达到低电量判断标准,即认为RTC电池电量低,需要更换电池。实验结果表明,该软硬件双重保障的RTC电池电量监测电路可有效监测电池状态,避免电池出现馈电。In the paper,a RTC battery power monitoring circuit based on hardware and software dual protection is designed.The low voltage detection threshold is set on the hardware,and the battery voltage is compared with the threshold voltage by using the comparator to judge the power state.The working time of the RTC battery is detected and recorded on the software,and the power state is judged after comparing with the theoretical working time of the evaluated battery.On the hardware and software,as long as one of the methods reaches the low power judgment standard,that is,the RTC battery power is low and the battery needs to be replaced.The experiment results show that,the hardware and software dual protection RTC battery power monitoring circuit can effectively detect the battery status and avoid battery feed.
分 类 号:TN402[电子电信—微电子学与固体电子学]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49