不同系统灵敏度荧光渗透检测的对比分析  

Comparative analysis of fluorescent penetrant testing with different system sensitivity

作　　者：王树志 肖雄晖 刘广华 高文博 曹合明 白铱 WANG Shuzhi;XIAO Xionghui;LIU Guanghua;GAO Wenbo;CAO Heming;BAI Yi(Aviation Key Laboratory of Science and Technology on Aeronautical Materials Testing and Evaluation,Beijing Key Laboratory of Aeronautical Materials Testing and Evaluation,AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China)

机构地区：[1]中国航发北京航空材料研究院航空材料检测与评价北京市重点实验室材料检测与评价航空科技重点实验室,北京100095

出　　处：《无损检测》2023年第1期39-42,共4页Nondestructive Testing

摘　　要：使用不同系统灵敏度的荧光渗透液对人工盲孔缺陷试样进行检测,分析验证了在不同系统灵敏度的荧光渗透液下人工盲孔缺陷显示结果的差异。结果表明,采用相同系统灵敏度的荧光渗透液对人工盲孔进行检测时,后乳化型较水洗型灵敏度更高。对于孔洞类缺陷而言,直径和深度的关系是影响渗透检测灵敏度的重要因素。The artificial blind hole defect samples were tested by using fluorescent penetrants with different system sensitivities,and the differences in the display results of artificial blind hole defects by using fluorescent penetrants with different system sensitivities were analyzed and verified.The results show that the sensitivity of the post-emulsification penetrant is higher than that of the water washable penetrant when the fluorescent penetrants with the same system sensitivity are used to detect the artificial blind hole.For holes,the relation between their diameter and depth is an important factor affecting the sensitivity of penetrant testing.

关 键 词：渗透检测 单晶 高温合金 灵敏度 荧光显示 

分 类 号：TG115.28[金属学及工艺—物理冶金]