Analysis of stresses at the center of transversely isotropic Brazilian disk  

作　　者：Ali Aminzadeh Florian Amann 

机构地区：[1]Institute of Geology of the Czech Academy of Sciences,Prague,Czech Republic [2]Chair of Engineering Geology,RWTH Aachen University,Aachen,Germany

出　　处：《Journal of Rock Mechanics and Geotechnical Engineering》2023年第3期618-629,共12页岩石力学与岩土工程学报（英文版）

基　　金：partially supported by the Institute of Geology of the Czech Academy of Sciences project RVO 67985831.

摘　　要：This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius and the magnitude of applied load,as well as the material orientation with respect to the load axis and two dimensionless ratios with specific physical meanings and limitations.These two dimensionless parameters are the ratios of Young’s modulus and apparent shear modulus,although the ratio of apparent shear modulus will be eliminated if the Saint-Venant assumption is considered.Considerable finite element simulations are carried out to find the stresses at the disk center concerning the material orientation and the two dimensionless parameters.Also,an approximate formula obtained from analytical results,previously proposed in the literature for solving the tensile and compressive stresses at the disk center,is re-written and simplified based on these new definitions.The results of the approximate formula fitted to the analytical results are compared to those obtained from numerical solutions,suggesting a good agreement between the numerical and analytical methods.An approximate equation for the shear stress at the disk center is also formulated based on the numerical results.Finally,the influence of the assumptions for simplification of the proposed formula for the tensile,compressive,and shear stresses at the disk center is discussed,and simple and practical equations are proposed as estimations for the stresses at the center of the BD specimen for low to moderate anisotropic rocks.For highly anisotropic rocks,the reference plots can be used for more accuracy.

关 键 词：Brazilian test Transverse isotropy Rock anisotropy Anisotropic disk Tensile stress Shear stress 

分 类 号：TU45[建筑科学—岩土工程]