宽窄定子极轴向磁通开关磁阻电机的设计与分析  

Design and Characteristic Analysis of a Wide-Narrow Stator Poles Axial Flux Switched Reluctance Machine

作　　者：于丰源 陈昊[1,2] 闫文举 刘永强 董林杰 Yu Fengyuan;Chen Hao;Yan Wenju;Liu Yongqiang;Dong Linjie(School of Electrical Engineering China University of Mining and Technology,Xuzhou 221116,China;Xuzhou Key Laboratory of New Energy Electric Vehicle Technology and Equipment,Xuzhou 221116,China)

机构地区：[1]中国矿业大学电气工程学院,徐州221116 [2]徐州市新能源电动车技术与装备重点实验室,徐州221116

出　　处：《电工技术学报》2023年第5期1261-1274,共14页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金国际(地区)合作与交流项目-2019年度国家自然科学基金委员会与埃及科学研究技术院合作研究项目(51961145401);徐州市推动科技创新专项资金项目-创新能力建设计划(KC21315)资助。

摘　　要：针对开关磁阻电机存在转矩密度较低、转矩脉动较大的缺点,提出一种新型宽窄定子极轴向磁通开关磁阻电机。该电机采用并行式双定子结构,左右定子盘通过共享一个转子段保持短磁通路径,定子齿极为宽极和窄极交错排列,集中式绕组缠绕在定子宽极上,定子窄极上则不缠绕绕组,仅为磁路提供磁通路径。由于每个槽只放置一相绕组,使得绕组在磁、热和机械上的隔离程度更高,保证了电机的可靠性。该文首先介绍所提电机的拓扑结构和运行原理;根据功率方程设计了部分初始结构参数,利用有限元方法分析了尺寸参数对电机性能的影响,并利用田口算法对选取的4个关键尺寸参数进行了多目标优化,改进了电机性能;然后计算分析了所提电机结构的动、静态性能;最后,制造了样机,实验结果验证了所提电机结构的有效性。In recent years,switched reluctance motors(SRM)have been applied in electric vehicles and aerospace due to their simple and robust structure,good fault tolerance,large starting torque,and wide speed range.However,the low torque density and high torque ripple have limited their large-scale application.With the improvement of industrial manufacturing level,the axial flux motor(AFM)has gradually attracted attention due to its shorter axial length and higher power density.In this paper,a novel wide-narrow stator-pole axial flux SRM(WNS-AFSRM)is proposed and investigated.Firstly,the topology and operating principle of the WNS-AFSRM are introduced.The motor has a parallel double-stator structure in which the left and right stator discs maintain a short magnetic path by sharing one single rotor segment.The stator teeth are staggered between the wide and narrow poles,with concentrated windings wound on the wide stator poles and no windings on the narrow stator poles.Hence,better magnetic,thermal and mechanical isolation is achieved,and the reliability of the WNS-AFSRM is ensured.Secondly,the design flow chart is presented,the power equation is also given,and the initial structural parameters of the WNS-AFSRM are determined.The three-dimensional finite element method is employed to analyze the influence of six key dimensional parameters on the torque output capability.Then,four parameters with a considerable impact are selected,and the Taguchi algorithm is carried out to optimize these four key dimensional parameters to improve motor performance.Comparing the torque waveforms before and after the optimization shows that the maximum synthetic torque decreases from 34.21N·m to 31.01N·m,while the minimum synthetic torque increases from 19.46N·m to 21.71N·m.Thus,the torque ripple has been reduced by 39.9%from 63.1%to 37.9%.Besides,the average torque increases from 23.40N·m to 24.48N·m with an increment of 4.6%.Thirdly,the static and dynamic performance of the WNS-AFSRM is simulated,and the performance is compared with t

关 键 词：轴向磁通开关磁阻电机 有限元方法 多目标优化 电磁性能 

分 类 号：TM352[电气工程—电机]