检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘海洋 崔淑梅[1] 孙赫阳 LIU Haiyang;CUI Shumei;SUN Heyang(School of Electrical Engineering and Automation,Harbin Institute of Technology,Harbin 150001,China;School of Electrical Engineering,Northeast Electric Power University,Jilin 132011,China)
机构地区:[1]哈尔滨工业大学电气工程及自动化学院,哈尔滨150001 [2]东北电力大学电气工程学院,吉林132011
出 处:《高电压技术》2023年第2期727-737,共11页High Voltage Engineering
摘 要:为了精确地反映死区时间对双有源桥式变换器(dual active bridge,DAB)移相角偏移与传输功率的影响,将缓冲电容的作用引入到DAB死区效应的分析中。通过设定最优死区时间将电感电流过零点排除在死区时段之外,降低了不同电压模式下死区过程分析的难度,并得到一个更精确的DAB移相角与传输功率的模型。结果表明:应用该模型能够准确地计算出DAB任意工况下的静态工作点,从而提高DAB小信号建模的精度。In order to precisely describe the influences of the dead time on the dual active bridge(DAB)phase-shift deviation and power transmission,the snubber capacitance is introduced to the DAB dead-time effects.By setting the optimal dead time,the inductance current of the DAB converter ensures the zero-crossing point outside the dead time,thus the dead-time analysis is simplified in different voltage modes and the DAB power transmission is calculated more accurately with this dead-time model.The results show that this DAB dead-time model can deduce the steady-state solution accurately while the DAB small-signal modeling is promoted.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.191.142.102