检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:高正心 徐秋怡 龚飞 谭苏华 洪雅玲 龚卿 施飞 胡巧英 余奇 傅深 GAO Zhengxin;XU Qiuyi;GONG Fei;TAN Suhua;HONG Yaling;GONG Qing;SHI Fei;HU Qiaoying;YU Qi;FU Shen(Shanghai Concord Cancer Center/Shanghai Concord Medical Outpatient Department,Shanghai 200020,China;State Key Laboratory of Radiation Medicine and Protection/Proton&Heavy Ion Medical Research Center,Soochow University,Suzhou 215213,China;Shanghai United Imaging Healthcare Co.,Ltd.,Shanghai 201807,China)
机构地区:[1]上海泰和诚肿瘤医院/上海美中嘉和肿瘤门诊部,上海200020 [2]放射医学与辐射防护国家重点实验室/苏州大学质子重离子医学研究中心,江苏苏州215213 [3]上海联影医疗科技股份有限公司,上海201807
出 处:《中国医学物理学杂志》2023年第3期286-290,共5页Chinese Journal of Medical Physics
基 金:国家肿瘤质控中心放疗质控指南项目(201905);省部共建放射医学与辐射防护国家重点实验室开放课题(GZK1202130);上海市黄浦区卫生健康系统科研项目(HLZ202218)。
摘 要:目的:探索一种适用于全身照射(TBI)的CT重建方法,可同体位连续扫描后获得一套完整的全身模拟定位CT。方法:使用TBI CT重建方法对患者进行CT模拟定位,完成后于Eclipse v15.5计划系统中生成一套全身模拟定位CT,将其运用到TBI计划设计与评估。在应用过程中,基于Python系统开发出相应的图像重建软件,与手动图像重建结果进行对比。结果:该全身模拟定位扫描方案可在Eclipse v15.5中实现两套CT的重建。在工作效率上,手工重建方法生成全身模拟定位CT平均需要10 min,软件重建方法只需要5 s。两种CT重建方法在图像质量上无差异,重建CT与真实值相比误差小于1 mm。使用重建的全身模拟定位进行TBI计划设计与评估,靶区适形度指数(CI)=0.854,剂量均匀性指数(HI)=0.199。结论:本文介绍的TBI全身模拟定位CT扫描与图像重建的方法可以简单、快速地获得完整的全身模拟定位CT图像,适用于后期的TBI计划设计、优化和评估过程。Objective To explore a CT reconstruction method suitable for total-body irradiation(TBI),which can obtain a complete set of total-body CT images after continuous scanning at the same posture.Methods After CT simulation positioning using the TBI CT reconstruction method,a set of total-body CT images was generated in Eclipse v15.5 system,and it was applied to TBI planning and plan evaluation.Meanwhile,the corresponding image reconstruction software was developed based on Python system,and the reconstruction results were compared with manual image reconstruction results.Results The scanning protocol for the total-body simulation and positioning completed the reconstruction of two sets of CT images in Eclipse v15.5.The manual reconstruction method took 10 min on average to generate each set of total-body CT images,while the software only took 5 s.The image quality between the two CT image reconstruction methods did not differ significantly,and the error between the reconstructed CT and the real value was less than 1 mm.The TBI plan was formulated based on the reconstructed whole-body CT,and the plan evaluation showed that the conformity index and homogeneity index of target area were 0.854 and 0.199,respectively.Conclusion The total-body CT simulation and image reconstruction method for TBI can obtain a complete set of total-body CT images simply and quickly,which is suitable for the later TBI planning,optimization and evaluation.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33