基于电子齿轮箱的内齿珩轮强力珩齿轮廓误差补偿控制研究  

Research on contour error compensation control of internal gear power honing based on electronic gearbox

作　　者：吴佳璐 夏链[1,2] 韩江 田晓青[1,2] 黄晓勇 WU Jialu;XIA Lian;HAN Jiang;TIAN Xiaoqing;HUANG Xiaoyong(School of Mechanical Engineering,Hefei University of Technology,Hefei 230009,China;Anhui Engineering Laboratory of Intelligent CNC Technology and Equipment,Hefei 230009,China)

机构地区：[1]合肥工业大学机械工程学院,安徽合肥230009 [2]安徽省智能数控技术及装备工程实验室,安徽合肥230009

出　　处：《合肥工业大学学报（自然科学版）》2023年第3期303-307,340,共6页Journal of Hefei University of Technology：Natural Science

基　　金：国家重点研发计划资助项目(2020YFE0201000-3);国家自然科学基金资助项目(52075142)。

摘　　要：多轴控制系统的轮廓误差具有强耦合特点,由于是多轴联动产生的结果,仅提高单轴的跟踪精度不一定能降低轮廓误差。为降低珩齿多轴控制系统的齿面轮廓误差,进一步提高珩齿的加工精度,文章提出一种简单有效的补偿控制策略。分析珩齿机的机床结构,根据珩齿多轴电子齿轮箱(electronic gearbox,EGB)控制系统的数学模型推导出基于齿轮啮合原理和坐标变换的齿面轮廓误差数学模型,并设计出一种简单的齿面轮廓误差补偿控制器。仿真和实验结果表明,所提出的补偿控制策略对降低齿面轮廓误差有显著的效果。该文方法对提高珩齿实际加工精度具有一定的指导意义。The contour error of multi-axis control system has the characteristics of strong coupling,only improving the tracking accuracy of single axis does not necessarily reduce the contour error,because the contour error is the result of multi-axis linkage.In this paper,a simple and effective compensation control strategy is proposed to reduce the tooth profile error of gear honing multi-axis control system and further improve the machining accuracy of gear honing.The structure of gear honing machine is analyzed,and according to the mathematical model of gear honing multi-axis electronic gearbox(EGB)control system,the mathematical model of tooth profile error based on gear meshing principle and coordinate transformation is deduced.A simple compensation controller for tooth profile error is designed.The simulation and experimental results show that the proposed compensation control strategy has a significant effect on reducing the tooth profile error.This method is valuable for improving the actual machining accuracy of gear honing.

关 键 词：内齿珩轮强力珩齿 多轴控制系统 电子齿轮箱(EGB) 轮廓误差 补偿 

分 类 号：TG618.2[金属学及工艺—金属切削加工及机床]