检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:叶喜葱[1,2] 杨超 欧阳宾 高琦 吴海华 何恩义[1,2] 叶永盛 YE Xicong;YANG Chao;OUYANG Bin;GAO Qi;WU Haihua;HE Enyi;YE Yongsheng(Hubei Engineering Research Center for Graphite Additive Manufacturing Technology and Equipment,China Three Gorges University,Yichang 443002,China;College of Mechanical&Power Engineering,China Three Gorges University,Yichang 443002,China)
机构地区:[1]三峡大学石墨增材制造技术与装备湖北省工程研究中心,宜昌443002 [2]三峡大学机械与动力学院,宜昌443002
出 处:《复合材料学报》2023年第2期911-928,共18页Acta Materiae Compositae Sinica
基 金:国家自然科学基金(51575313);三峡大学石墨增材制造技术与装备湖北省工程研究中心开放基金(HRCGAM202101)。
摘 要:多元材料复合是制备轻质、宽频和强吸收吸波材料的有效方法。以聚乳酸(PLA)为基体,FeSiAl、MoS_(2)和石墨烯(GN)为填料,通过球磨和熔融挤出两步法制备了可用于熔融沉积成形(FDM)的FeSiAl-MoS_(2)-GN/PLA复合材料。采用XRD、拉曼光谱、SEM和矢量网络分析仪分别对复合材料的物相结构、微观形貌和电磁特性进行了表征,并研究了石墨烯含量对复合材料吸波性能的影响。研究表明:石墨烯、FeSiAl和MoS_(2)随机分散在PLA基体中,形成了复杂的导电网络;多元材料复合构筑了丰富的介电/磁异质界面,有利于促进界面极化;当石墨烯含量增加时,复合材料的吸波性能随之增强,当石墨烯含量为5wt%时,复合材料的吸波性能最佳,在厚度为1.7 mm时最小反射损耗为-27.90 dB,在厚度为1.9 mm时有效吸收带宽为4.96 GHz(12.64~17.60 GHz)。其优异的吸波性能归因于良好的阻抗匹配及介电损耗和磁损耗之间的协同作用。Multi-material composite is an effective method to prepare light-weight,broadband and strong absorbing materials.In this paper,polylactic acid(PLA)was used as the matrix material,and FeSiAl,MoS_(2)and graphene(GN)were used as fillers.FeSiAl-MoS_(2)-GN/PLA composites,which were used for fused deposition modeling(FDM),prepared by the two-step process of ball milling and melt extrusion.The phase structure,microscopic morphology and electromagnetic properties of composites were characterized by XRD,Raman spectroscopy,SEM and vector network analyzer,respectively.And the effect of graphene content on the electromagnetic wave absorbing properties of composites was also investigated.The research shows that graphene,FeSiAl and MoS_(2) are randomly dispersed in the PLA matrix and form a complex conductive network;Multi-material composites build rich dielectric/magnetic heterointerfaces,which are beneficial to promote interface polarization;The higher the graphene content,the stronger the electromagnetic wave absorbing properties of composites;When the graphene content is 5wt%,the minimum reflection loss is-27.90 dB at a thickness of 1.7 mm,and the effective absorption bandwidth is 4.96 GHz(12.64-17.60 GHz)at a thickness of 1.9 mm.Its excellent absorbing properties are attributed to the perfect impedance matching and the synergy between dielectric and magnetic losses.
关 键 词:复合材料 FeSiAl MoS_(2) 石墨烯 阻抗匹配 吸波性能
分 类 号:TB333[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117