基于时分复用的四通道光纤旋转连接器设计与性能测试  

Design and performance test of four-channel optical fiber optic rotary joint based on time division multiplexing

作　　者：魏莉[1] 吴宇昌 位燕辉 WEI Li;WU Yuchang;WEI Yanhui(School of Mechanical and Electrical Engineering,Wuhan University of Technology,Wuhan 430070,China)

机构地区：[1]武汉理工大学机电工程学院,武汉430070

出　　处：《光通信技术》2023年第2期64-67,共4页Optical Communication Technology

摘　　要：针对高速旋转设备分布式测量需求,设计了一种单通道光纤旋转连接器(FROJ),并进行了性能测试。以此单通道FROJ为基础,采用磁光开关通过时分复用方式设计了四通道FROJ,在静态和动态条件下分别测试了其插入损耗。实验结果表明:该四通道FROJ的插入损耗小于4.5 d B,旋转变化量小于2 d B,在转速不超过600 r/min时可以实现光信号的可靠传输。Aim at the distributed measurement requirements of high-speed rotating equipment, a single-channel fiber optic rotary joint(FROJ) is designed and its performance is tested. Based on single-channel FROJ, four-channel FROJ is designed by magneto-optical switch, and its insertion loss is tested under static and dynamic conditions. The experimental results show that the insertion loss of the four-channel FROJ is less than 4.5 dB, the rotation variation is less than 2 dB, and the reliable optical signal transmission can be realized when the speed does not exceed 600 r/min.

关 键 词：光纤旋转连接器 磁光开关 时分复用 多通道光信号传输 分布式测量 

分 类 号：TN253[电子电信—物理电子学]