方形锂离子电池热行为集总建模仿真与实验  

Thermal behavior of square lithium-ion batteries based on lumped model

作　　者：林福兴 吴国庆 陈丙三 范成龙 LIN Fuxing;WU Guoqing;CHEN Bingsan;FAN Chenglong(Fujian Key Laboratory of Intelligent Machining Technology and Equipment,Fujian University of Technology,Fuzhou 350118,China;School of Mechanical and Automotive Engineering,Fujian University of Technology,Fuzhou 350118,China;Fujian Edgelion Power Technology Co.,Ltd.,Fuzhou 350000,China)

机构地区：[1]福建省智能加工技术及装备重点实验室,福建福州350118 [2]福建工程学院机械与汽车工程学院,福建福州350118 [3]福建云众动力科技有限公司,福建福州350000

出　　处：《福建工程学院学报》2023年第1期49-54,共6页Journal of Fujian University of Technology

摘　　要：针对锂离子电池电化学产热机理复杂、热分析建模参数多等问题,引入集总模型思想,建立单体方形电池少参化产热模型。通过大量实验、数据分析,辩识电池热物性参数,获得基于真实物理参数的热行为仿真集总模型。对比单体电池在不同放电倍率下温度场的实验数据和仿真结果发现:在0.2、0.5、1 C恒流放电工况下,集总模型对电池表面温度的预测误差均低于0.55℃,误差率小于1.94%,达到实际工程预测精度要求。该研究结果可为商业化锂离子电池热行为分析提供参考。To address the problems of complex electrochemical heat generation mechanism of lithium-ion batteries and multiple parameters of thermal analysis modeling,the idea of lumped model was introduced to establish a minimal parametric heat generation model for single square battery.The thermal parameters of the battery were identified through a large number of experiments and data analysis,and a lumped model of the thermal behavior based on real physical parameters was obtained.Comparing the experimental data and simulation results of the temperature field of single battery at different discharge rates,it is found that the errors of the lumped model for the prediction of the battery surface temperature are all lower than 0.55℃and the error rate is less than 1.94%under 0.2C,0.5C and 1C constant current discharge conditions,which meets the requirement of actual engineering prediction accuracy.This study can provide some credible references for the analysis of the thermal behavior of commercial lithium-ion batteries.

关 键 词：单体方形锂离子电池 热建模 集总模型 热物性参数 有限元分析 

分 类 号：U262.44[机械工程—车辆工程]