Numerical study on the hydrodynamics behavior of a central insert microchannel  

作　　者：Yongbo Zhou Yang Jin Jun Li Qinyan Wang Ming Chen 

机构地区：[1]Engineering Research Center of Comprehensive Utilization and Clean Processing of Phosphorus Resources,School of Chemical Engineering,Sichuan University,Chengdu 610065,China

出　　处：《Chinese Journal of Chemical Engineering》2023年第1期361-373,共13页中国化学工程学报（英文版）

基　　金：supported by the National Natural Science Foundation of China(21776180,22108177);the Key Research Development Project of Sichuan Province(21ZDYF4086).

摘　　要：In this work, the computational fluid dynamics method is used to study the liquid hydrodynamics behavior in the microchannel without central insert(MC1) and the central insert microchannel(MC2), respectively. The maximum deviation between simulation and experiment is 24%. The formations of flow patterns are explained based on contours and force analysis where the flow pattern maps are established by two-phase flow rate. The effects of aqueous phase viscosity and two-phase flow rate on the characteristic sizes of each flow pattern are also explored. Specifically, four unconventional flow patterns are found in MC2, namely the unique droplet flow, the unique slug flow, the unique coarse annular flow and the unique film annular flow. Though the insert occupies part of the channel, the pressure difference in the channel is significantly reduced compared with MC1. Moreover, the insert significantly changes the formation velocity range of each flow pattern, greatly broadens the formation range of annular flow and also has an important influence on the characteristic size of the flow pattern. The organic-phase dimensionless axial size(Lo/W) and the dimensionless radial size(Do/W) of the droplet(slug) are negatively related to the aqueous-phase viscosity(μa) and flow rate(ua). The Do/W of the annular is negatively correlated with μaand positively correlated with organic-phase flow rate(uo). This study provides direct numerical evidence that the insert is key to the formation of bicontinuous phase flow pattern, as well as further strengthens our understanding of the flow characteristics and optimization design of insert microchannels.

关 键 词：MICROCHANNEL Process intensification Computational fluid dynamics Liquid–liquid flow pattern Central insert 

分 类 号：TQ021.1[化学工程]