利用废机铁生产可锻铸铁管件的工艺研究  

Process Investigation of Malleable Cast Iron Production Using Scrap Iron

作　　者：艾晨光 刘金生 李萍 杨跃辉[2] 苑少强[2] AI Chen-guang;LIU Jin-sheng;LI Ping;YANG Yue-hui;YUAN Shao-qiang(Hebei Jianzhi casting Group Co.,Ltd.,Tangshan Hebei 064100,China;Key Lab of Intelligent Equipment Digital Design and Process Simulation,Hebei,Tangshan,University,Tangshan,Hebei 063000,China)

机构地区：[1]河北建支铸造集团有限公司,河北唐山064100 [2]河北省智能装备数字化设计及过程仿真重点实验室,唐山学院,河北唐山063000

出　　处：《铸造设备与工艺》2023年第1期30-32,共3页Foundry Equipment & Technology

基　　金：唐山市科技创新团队培养计划项目(20130209D)。

摘　　要：以废机铁为主要原材料改进可锻铸铁配料,采用中频炉熔炼及优化的热处理工艺,生产出了新型可锻铸铁管件,力学性能测试及金相组织观察结果表明:所得可锻铸铁的抗拉强度平均为335.3 MPa、布氏硬度为104.5 HBW、延伸率达到9.42%,优于KTH 330-08的性能指标要求,其基体组织为多边形铁素体,含有极少量的珠光体,团絮状石墨分布均匀、石墨团大小均匀,完全满足了客户对管件产品的需求。The new type of malleable cast pipes was developed by way of using scrap machine iron as major materials to improve cast ingredients,along with medium frequency furnace smelting and optimization heat treatment process.Combined with mechanical test and morphology observation,the average tensile strength is 335.3 MPa,hardness is 104.5 HBW and 9.42%for elongation respectively.The comprehensive mechanical properties are higher than that of KTH 330-08 as a standard.The microstructures is composed o£polygonal femte and very few of pearlite.Graphite mass is evenly distributed and has the similar size.The production of malleable cast iron has fully met the customer's needs..

关 键 词：废机铁 可锻铸铁 退火 石墨化 显微组织 

分 类 号：TG143.4[一般工业技术—材料科学与工程] TG249.3[金属学及工艺—金属材料]