直动型伺服比例阀的结构优化设计及动态特性研究  

Dynamic Characteristics Research and Structural Optimization Design of Direct Acting Servo Proportional Valve

作　　者：陈逸嘉 陈东升 林广 赵静一 金光俊 陈博 Chen Yijia;Chen Dongsheng;Lin Guang;Zhao Jingyi;Jin Guangjun;Chen Bo(Youweili Hydraulic Technology Co.,Ltd.,Haimen,Jiangsu 226100;Qinhuangdao Yanda Yihua Electromechanical Engineering Technology Research Institute Co.,Ltd.,Qinhuangdao 066000;Xuzhou Xugong Excavation Machinery Co.,Ltd.,Jiangsu 221000)

机构地区：[1]油威力液压科技股份有限公司,江苏海门226100 [2]秦皇岛燕大一华机电工程技术研究院有限公司,河北秦皇岛066000 [3]中徐州徐工挖掘机械有限公司,江苏徐州221000

出　　处：《冶金设备》2023年第1期1-6,共6页Metallurgical Equipment

基　　金：江苏省科技计划项目(BE2020104)。

摘　　要：针对国产DN80二通插装式伺服阀的先导控制提升动态特性问题,提出先导控制阀采用直动型伺服比例阀结构。首先设计与DN80二通插装式伺服阀的流量和阶跃响应匹配的直动型伺服比例阀的阀芯、阀套,并建立的直动型伺服比例阀三维数模,利用AMEsim软件详细分析了直动型伺服比例阀的空载动态特性、带载动态特性情况,搭建专用大通径伺服阀试验台,验证了优化直动型伺服比例阀结构的DN80二通插装式伺服阀,其阶跃响应时间由40ms缩短至23ms,动态特性显著提高。Aiming at the pilot-controlled dynamic characteristics improvement of domestic DN80 two-way cartridge servo valve,a direct acting servo proportional valve structure is proposed for the pilot control valve in this work.Firstly,the spool,valve sleeve of the direct acting servo proportional valve are designed,in which the flow is matched with the step response of the DN80 two-way cartridge servo valve.The three-dimensional digital model of the direct acting servo proportional valve is established,and the no-load dynamic characteristics,loaded dynamic characteristics of the direct acting servo proportional valve are analyzed based on the AMEsim software.In addition,a special large-diameter servo valve experimental platform is built,and several sets of experiments are conducted.The results show that the DN80 two-way cartridge servo valve with optimized direct acting servo proportional valve structure is effective,and the step response time is shortened from 40ms to 23ms.It is verified that the dynamic characteristics are significantly improved.

关 键 词：伺服阀 比例阀 液动力 动态特性 

分 类 号：TH137.7[机械工程—机械制造及自动化]