工程设计中桥式双梁及单梁起重机的选择和配置  

Selection and configuration of bridge-type double-girder and single-girder cranes in engineering design

作　　者：杨昕东[1] 柴伟 Yang Xindong;Chai Wei(Shenyang Aluminum&Magnesium Engineering&Research Institute Co.,Ltd.,Shenyang 110001,China;Baotou Aluminum(Group)Co.,Ltd.,Baotou 014046,China)

机构地区：[1]沈阳铝镁设计研究院有限公司,辽宁沈阳110001 [2]包头铝业(集团)有限责任公司,内蒙古包头014046

出　　处：《轻金属》2023年第2期57-62,共6页Light Metals

摘　　要：桥式起重机是铝冶炼工业企业中通常使用的起重设备,其参数的选取、工作级别的确定以及各类型起重机的选用和配置均应根据现场实际情况确定,在设计中应注意操作环境及自然环境的影响,尽量方便人员操作。The bridge-type crane is a commonly-used lifting equipment in aluminum smelting enterprises.The selection of parameters,determination of work levels,as well as selection and configuration of various types of cranes should be determined according to the actual situation on site.In the design,attention should be paid to the impact of the operating environment and the natural environment,so that the manual operation can be facilitated.

关 键 词：桥式起重机 双梁 单梁 操作环境 

分 类 号：TF806.1[冶金工程—有色金属冶金] TF82