储能用管式胶体蓄电池的设计  

The design of tubular gelled lead-acid batteries for energy storage

作　　者：刁涵 杨晓东 孙言行 黄锦 DIAO Han;YANG Xiaodong;SUN Yanxing;Huang Jin(ShanxiLingyun Storage Battery Co.,Ltd.,Baoji Shaanxi 721304,China)

机构地区：[1]陕西凌云电池有限公司,陕西宝鸡721304

出　　处：《蓄电池》2023年第2期92-95,100,共5页Chinese LABAT Man

基　　金：陕西省工业攻关计划项目(2011K08-06)。

摘　　要：采用添加了石墨、红丹、中等硫酸量的正极铅膏、管式正极板、涂膏式负极板、PVC-SiO_(2)隔板、气相SiO2的质量分数为4.0%的胶体电解液、挤膏工艺技术,制备储能用管式胶体蓄电池。经试验表明,样品性能达到了GB/T 22473—2008的要求。其中,循环耐久能力达到了13个周期,荷电保持能力达到了98.6%。由此说明,该样品设计过程中所采取的技术手段,提高了储能用铅酸蓄电池的性能,延长了使用寿命,满足了风、光发电系统储能的要求。The positive paste with graphite,Pb_(3)O_(4)and medium sulfuric acid,tubular positive plates,paste coated negative plates,PVC-SiO_(2) separators,gelled electrolyte with gas phase SiO_(2)content of 4.0%,wet-filling process and other technologies were used in the tubular gelled batteries for energy storage.The test results showed that the performance of the samples meet the requirements of GB/T 22473—2008,in which the cycle endurance reached 13 cycles,and the charge retention reached 98.6%.So the technical means adopted in the sample design process improve the performance and prolong the service life of lead-acid battery for energy storage,and meets the energy storage requirements of wind and solar power generation system.

关 键 词：管式正极板 胶体电解液 储能 蓄电池 石墨 红丹 涂膏式负极板 PVC-SiO_(2)隔板 

分 类 号：TM912.1[电气工程—电力电子与电力传动]