燃煤锅炉SCR前高温除尘对脱硝催化剂保护的研究  

Research on protection of denitrification catalyst by high-temperature dedusting before SCR for coal-fired boiler

作　　者：任福春 任育杰 张纪平 REN Fu-chun;REN Yu-jie;ZHANG Ji-ping

机构地区：[1]中节能工业节能有限公司,北京100082 [2]中国工业节能与清洁生产协会,北京100035

出　　处：《节能》2023年第3期49-52,共4页Energy Conservation

基　　金：国家重点研发计划项目(项目编号:2016YFB0600700)。

摘　　要：为了减轻甚至消除燃煤飞灰对选择性催化还原(SCR)催化剂的堵塞、磨损和中毒,分析飞灰对SCR催化剂的影响和现行应对措施,论述金属膜滤料和高温除尘器的主要性能,研究金属膜高温除尘器在某410 t/h燃煤锅炉上的应用效果。结果显示:布置在SCR前的高温除尘器能够极大减少进入SCR的飞灰,有效消除飞灰对催化剂的堵塞、磨损和中毒现象,还能够延长催化剂使用寿命,减小SCR和空预器阻力,节约超低排放系统能耗和成本。To reduce or even eliminate the blocking,abrasion and poisoning of SCR catalyst caused by fly ash from coal burning,the influence of fly ash on SCR catalysts and the current countermeasures are analyzed,the main properties of metallic membrance filtering material and high-temperature precipitator,and the application effect of metallic membrance high-temperature precipitator in a 410 t/h coal-fired boiler is analyzed.The results show that the high-temperature precipitator placed in front of SCR can greatly reduce the fly ash entering SCR,and effectively eliminate the blocking,abrasion and poisoning of the catalyst,and also extend the service life of the catalyst,reduce the resistance of SCR and air preheater,and save the energy consumption and cost of the ultra-low emission system.

关 键 词：SCR催化剂 燃煤锅炉 磨损 堵塞 中毒 高温除尘 

分 类 号：TK223.3[动力工程及工程热物理—动力机械及工程]