基于FME软件的港口总体规划数据转换方法研究  

Research on data conversion method for port master plans based on FME

作　　者：姚海元[1,2] 李徐 王达川[1] 倪瑞鸿 齐越[1] YAO Haiyuan;LI Xu;WANG Dachuan;NI Ruihong;QI Yue(Transport Planning and Research Institute,Ministry of Transport,Beijing 100028,China;Tianjin University,Tianjin 300072,China;Dalian University of Technology,Dalian 116024,China)

机构地区：[1]交通运输部规划研究院,北京100028 [2]天津大学,天津300072 [3]大连理工大学,辽宁大连116024

出　　处：《水运工程》2023年第4期1-8,共8页Port & Waterway Engineering

基　　金：国家重点研发计划项目(2021YFB2600700)。

摘　　要：原交通部于2006年印发《港口总体规划编制内容及文本格式》,明确了规划图纸的相关要求。港口总体规划图集是直观表现港口规划内容的手段,为满足港口总体规划图件绘制在“多规合一”新阶段下的要求,解决图集绘制中遇到的港口水域基础数据缺失、软件间数据转换等问题,提出基于FME软件的港口总体规划数据转换方法,利用FME将传统以AutoCAD为载体的港口规划数据准确无损地转换为GIS格式,以及将电子海图地理数据提取转化出来,使其弥补缺失的港口水域基础数据。经实际案例证明,基于FME的港口总体规划数据转换方法能满足港口总体规划图集绘制的新要求。In 2006,the former Ministry of Communications issued The Content and Text Format of Port Master Plan,which clarified the relevant requirements for planning drawings.The port master plan atlas is a means of visually expressing the content of port planning.Under the requirements of the new stage of“integration of multiple plans”,the atlas drawing of port master plans encounters the problems such as the lack of basic data on port waters and data conversion between software.To solve these problems,this paper proposes a data conversion method for port master plans based on the software FME.This method uses FME to accurately and non-destructively convert the port planning data traditionally carried by the software AutoCAD into the GIS format and extracts and converts the geographic data of electronic charts to make up for the missing basic data on port waters.Practical applications prove that the proposed method can meet the new requirements for the atlas drawing of port master plans.

关 键 词：FME 港口总体规划 数据转换 电子海图 

分 类 号：TK448.21[动力工程及工程热物理—动力机械及工程] U651[交通运输工程—港口、海岸及近海工程]