清洁高速硬切削模具钢的仿真与试验研究  

Simulation and experiment research of clean high speed hard-cutting of die steel

作　　者：荆成利 郑光明[1,2] 王成 刘丰江 苏红星 JING Chengli;ZHENG Guangming;WANG Cheng;LIU Fengjiang;SU Hongxing(School of Mechanical Engineering,Shandong University of Technology,Zibo 255000,China;Shandong Provincial Key Laboratory of Precision Manufacturing and Non-traditional Machining,Zibo 255000,China;Shandong Connecting Rod Factory,Linyi 276400,China)

机构地区：[1]山东理工大学机械工程学院,淄博255000 [2]山东省精密制造与特种加工重点实验室,淄博255000 [3]山东连杆总厂有限公司,临沂276400

出　　处：《现代制造工程》2023年第4期110-115,共6页Modern Manufacturing Engineering

基　　金：山东省自然科学基金资助项目(ZR2020ME156);山东省科技型中小企业创新能力提升工程项目(2021TSGC1433);山东省精密制造与特种加工重点实验室资助项目。

摘　　要：高速切削H13淬硬模具钢时刀具寿命短、刀具磨损严重等问题突出。基于清洁切削技术,采用硬质合金涂层刀具进行高速硬切削H13钢的仿真试验,研究干式、清洁切削介质(冷风、低温氮气和液氮)对涂层刀具硬切削性能的影响,探究运用清洁切削技术提升涂层刀具寿命的可行性。研究表明:与干式切削相比,清洁切削介质可以有效地控制切削区域温度,减少刀具磨损,延长刀具寿命;液氮切削时切削合力减少9.8%,切削区域温度下降12.4%,刀具寿命提高55.6%,可获得最好的刀具切削性能。研究可为H13钢的清洁高速硬切削加工提供参考。The problems of short tool life and severe tool wear during high speed cutting of H13 hardened die steel were prominent.Based on the clean cutting technology,the simulation test of high speed hard-cutting of H13 steel using carbide coated tool was conducted to study the effect of dry and clean cutting media(cold air,low temperature nitrogen,liquid nitrogen) on the hard-cutting performance of the coated tool,and to investigate the feasibility of using clean cutting technology to improve the life of the coated tool.The result demonstrated that compared with dry cutting,the clean cutting media can effectively control the temperature of the cutting area,reduce tool wear and extend tool life.The best tool cutting performance was obtained with 9.8 % reduction in cutting combination force,12.4 % reduction in cutting area temperature and 55.6 % increase in tool life when cutting with liquid nitrogen.The study can provide reference for clean and high speed hard-cutting of H13 steel.

关 键 词：清洁切削 硬切削 模具钢 有限元仿真 刀具性能 

分 类 号：TH164[机械工程—机械制造及自动化] TG714[金属学及工艺—刀具与模具]