保暖服传热分析及数值模拟  

Heat Transfer Analysis and Numerical Simulation of Heating Garment

作　　者：马旭东 马瑞 宁粤[1,2] 郭嘉敏 吴玉庭 MA Xu-dong;MA Rui;NING Yue;GUO Jia-min;WU Yu-ting(College of Energy and Power Engineering,Inner Mongolia University of Technology,Hohhot 010051,China;Key Laboratory of Wind and Solar Energy Utilization Mechanism and Optimization in Inner Mongolia Autonomous Region,Inner Mongolia University of Technology,Hohhot 010051,China;College of Environment and Energy Engineering,Beijing University of Technology,Beijing 100124,China)

机构地区：[1]内蒙古工业大学能源与动力工程学院,呼和浩特010051 [2]内蒙古工业大学内蒙古自治区风能太阳能利用机理及优化重点实验室,呼和浩特010051 [3]北京工业大学环境与能源工程学院,北京100124

出　　处：《科学技术与工程》2023年第8期3272-3279,共8页Science Technology and Engineering

基　　金：国家自然科学基金(51906116);内蒙古自然科学基金(2019BS05007);内蒙古科技计划(2021GG0253)。

摘　　要：个体保暖注重人体周围微环境的调节,在满足热舒适度的前提下可以实现节能。使用COMSOL Multiphysics软件建立了人体—保暖服的流动传热模型,研究了循环水入口速度、循环水入口温度、人体代谢率和环境温度对保暖服保暖性能的影响。结果表明:循环水入口速度和入口温度的增大都会提高保暖效果,保暖服的最佳入口速度为0.6 m/s;循环水入口温度每增加5℃,人体平均温度增加3.92℃,人体表面平均温度增加3.90℃;人体代谢率对保暖效果几乎没有影响。设计保暖服时选取合适的循环水入口速度和温度可以满足热舒适度,同时也可以实现节能。Individual heating focuses on the regulation of the microenvironment around the body,which can achieve energy saving while satisfying the thermal comfort.Using COMSOL Multiphysics software,the flow heat transfer model of body-heating garment was established and the effects of circulating water inlet speed,circulating water inlet temperature,human metabolic rate and ambient temperature on the heating performance of heating garment were studied.The results show that the increase of circulating water inlet speed and inlet temperature will improve the heating effect,and the optimal inlet speed of the heating garment is 0.6 m/s.For every 5℃increase of circulating water inlet temperature,the average body temperature increases by 3.92℃and the average body surface temperature increases by 3.90℃.The human metabolic rate has almost no effect on the heating effect.Selecting the appropriate circulating water inlet speed and temperature when designing the heating garment can meet the thermal comfort and also achieve energy saving.

关 键 词：保暖服 数值模拟 优化设计 热舒适性 节能 

分 类 号：TK123[动力工程及工程热物理—工程热物理]