换热器用09MnNiDR低温钢焊接工艺研究  

Study on welding technology for 09MnNiDR low-temperature steel of heat exchangers

作　　者：刘明志 吴晶晶 宋嘉 Liu Mingzhi;Wu Jingjing;Song Jia(Xi’an Huawei Chemical&Biologic Engineering Co.,Ltd.,Xi’an 710100,Shaanxi,China;Chengdu Lihang Technology Co.,Ltd.,Chengdu 610073,Sichuan,China)

机构地区：[1]西安航天华威化工生物工程有限公司,陕西西安710100 [2]成都立航科技股份有限公司,四川成都610073

出　　处：《特钢技术》2023年第1期40-43,共4页Special Steel Technology

摘　　要：针对某公司承接的换热器技术要求,分析了板厚为45mm的09MnNiDR低温钢板的焊接性能,并进行焊接工艺评定,确定了适用于该材料的焊接工艺参数。研究结果表明,在合适的焊接工艺参数下,采用ER55-Ni3焊丝进行钨极氩弧焊和E5015-N5焊条进行焊条电弧焊,09MnNiDR低温钢焊缝的各项指标均能满足设计要求。According to the technical requirements of heat exchanger undertaken by the company,analyzed the welding performance of 09MnNiDR low-temperature steel with 45mm plate thickness,evaluated the welding process,and the welding process parameters suitable for this material were confirmed.The results show that under the appropriate welding process parameters,using ER55-Ni3 wire for tungsten argon arc welding and E5015-N5 electrode for arc welding,various indexes of 09MnNiDR low-temperature steel weld can meet the design requirements.

关 键 词：换热器 09MNNIDR钢 焊接 工艺参数 工艺试验 

分 类 号：TG457.11[金属学及工艺—焊接]