天然气径向分级燃烧室低NOx排放的优化研究  

Optimization investigation of low NOx emissions of natural gas radially staged combustor

作　　者：田园[1] 耿俊杰 孙逸凡 祁海鹰[1] TIAN Yuan;GENG Junjie;SUN Yifan;QI Haiying(Department of Energy and Power Engineering,Tsinghua University,Beijing 100084,China)

机构地区：[1]清华大学能源与动力工程系,北京100084

出　　处：《清华大学学报（自然科学版）》2023年第4期660-669,共10页Journal of Tsinghua University(Science and Technology)

基　　金：国家科技重大专项资助项目(Y2019-I-0022-0021)。

摘　　要：为解决天然气径向分级燃烧室NOx排放超标问题,该文采用数值模拟和试验方法研究了天然气径向分级燃烧室结构改进策略和优化方案,多喷嘴参数匹配关系及部分负荷下NOx排放的预测关系式。结果表明:改变掺混孔径的达标方案合理可行,得到孔径值44.45 mm和其他性能参数的变化规律;中心喷嘴是决定NOx排放水平的主要因素;多喷嘴匹配关系的低排放设计准则是喷嘴燃料量相等;改进NOx排放预测公式准确反映了其部分负荷行为。该研究可为燃烧室后续试验调试和设计改进提供理论依据。[Objective]To solve the problem of excessive NOx emissions of the existing natural gas radially staged combustor,the design principle of parameter matching between multiple nozzles at the head of the combustion chamber is explored,and an optimized prediction formula for NOx emission performance of the combustor is obtained.[Methods]This study adopts numerical simulation and experimental data analysis methods.The different loads and diameters of the dilution holes of the combustor are numerically simulated.Through the numerical analysis of the nonuniformity of the premix and the equivalent ratio of the original design,a structural improvement strategy and an optimization scheme to reduce the dilution holes'diameter were proposed.The influence of the improvement in the dilution holes'diameter on NOx emissions and that of the modification scheme on the total pressure loss and other performance parameters were investigated.The relationship between parameter matching of multiple nozzles and NOx emission under different combustion modes was investigated.Because of the deficiency of the current NOx emission prediction formula,based on the experimental and numerical data,the prediction formula of NOx emission under partial load is improved.[Results]Results showed that the original low-emission design of the combustor was unreasonable,and the NOx emission value was six times that of the limit value of 41 mg/Nm3 at 15%O2.The standard scheme of changing the dilution holes'diameter was reasonable and feasible,and the dilution holes'diameter Djet=44.45 mm can ensure that the standard of NOx was determined and verified by the experiment.The resulting changed in the total pressure loss and other performance parameters were within the acceptable range.In the proposed dilution holes'diameter modification scheme,the change in the dilution holes'area from large to small was 33.1%,47.1%,and 59.5%,which exceeded 30%of the original design,and the head structure was not redesigned.A warning that the combustor may face the risk of wall

关 键 词：天然气径向分级燃烧室 结构改进策略 掺混孔径变更 多喷嘴匹配关系 NOx排放预测公式 

分 类 号：TK472.6[动力工程及工程热物理—动力机械及工程]