检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱祥龙 谢帅 董超群[1] 刘建勋 任连城[1] 郭正伟 杨民 Zhu Xianglong;Xie Shuai;Dong Chaoqun;Liu Jianxun;Ren Liancheng;Guo Zhengwei;Yang Min(School of Mechanical and Mower Engineering,Chongqing University of Science and Technology,Chongqing 401331,China;The Provincial and Ministerial Collaborative Innovation Center for Domestic Garbage Resource Treatment,Chongqing 401331,China;Honghua Oil&Gas Engineering and Technology Services Co.,Ltd.,Chengdu 610036,China)
机构地区:[1]重庆科技学院机械与动力工程学院,重庆401331 [2]生活垃圾资源化处理省部共建协同创新中心,重庆401331 [3]宏华油气工程技术服务有限公司,四川成都610036
出 处:《锻压技术》2023年第4期110-120,共11页Forging & Stamping Technology
基 金:重庆市教委科学技术研究项目(KJQN202001502);生活垃圾资源化处理省部共建协同创新中心(shljzyh2021-12);重庆市自然科学基金资助项目(cstc2020jcyj-msxmX0410)。
摘 要:为解决凹坑换热管生产成本高、加工效率低的问题,设计了一种多节距快速成形挤压装置,并采用数值仿真方法考察挤压深度D、挤压间距P和压头半径R对成形性能的影响。基于响应曲面法,建立挤压成形参数与成形力学性能的多元回归方程。结果表明:回归方程是可靠有效的,可用于预测凹坑换热管的力学响应。采用响应曲面法研究挤压成形参数对光管应力、等效塑性应变和挤压力的影响,得到用于预测凹坑换热管成形力学响应的响应曲面模型。建立了二元交互回归预测模型,预测值与模拟值误差小于0.5%,可以更加直观地反映各挤压成形参数对成形力学性能的影响,有助于凹坑换热管的结构设计及生产制造,为凹坑换热管的结构设计及生产制造提供理论支撑。In order to solve the problems of high production cost and low processing efficiency of dimpled heat exchange tube,a extrusion device for multi-pitch rapid forming was designed,and the influences of extrusion depth D,extrusion interval P and indenter radius R on the forming performance were investigated by numerical simulation.Then,based on the response surface method,a multiple regression equation of extrusion forming parameters and forming mechanical properties was established.The results show that the regression equation is reliable and effective,which can be used to predict the mechanical response of dimpled heat exchange tube.The response surface method is used to study the influences of extrusion forming parameters on the stress,equivalent plastic strain and extrusion force of bare tube,and a response surface model for predicting the mechanical response of dimpled heat exchange tube is obtained.Furthermore,a binary interaction regression prediction model is established,and the error between the predicted and simulated values is less than 0.5%,which can more intuitively reflect the influence of various extrusion forming parameters on the forming mechanical properties,and is helpful for the structural design and manufacture of dimpled heat exchange tube,which provides theoretical support for the structural design and manufacture of dimpled heat exchange tube.
关 键 词:凹坑换热管 挤压成形 挤压深度 挤压间距 压头半径 力学响应
分 类 号:TG372[金属学及工艺—金属压力加工]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.3