基于定量泵与节流调速的硫化机开合模液压系统仿真  

Simulation of the hydraulic system for opening and closing mold of curing press based on quantitative pump and throttle speed regulation

作　　者：陈璐祺 艾子健[1] 张杰 陈烨 陈可欣 Chen Luqi;Ai Zijian;Zhang Jie;Chen Ye;Chen Kexin(School of Mechanical and Electrical Engineering,Sanming University,Sanming 365004,Fujian,China;Fujian Tianhua Intelligent Equipment Co.LTD.,Sanming 365004,Fujian,China)

机构地区：[1]三明学院机电工程学院,福建三明365004 [2]福建天华智能装备有限公司,福建三明365004

出　　处：《橡塑技术与装备》2023年第5期35-38,共4页China Rubber/Plastics Technology and Equipment

基　　金：中央引导地方科技发展专项(2022L3044);福建省教育厅中青年教师教育科研项目(JAT200610、B202001)。

摘　　要：本文分析了采用定量泵和节流调速回路的硫化机开合模液压系统,利用AMESim软件对开合模液压系统进行了仿真分析,指出了采用定量泵加节流调速回路的硫化机开合模液压系统,在慢速开模、慢速合模过程中存在较大的节流损失和溢流损失,导致系统容积效率不高,为硫化机液压系统的设计与优化提供了理论与技术参考。This article uses a quantitative pump and a throttle speed control circuit for the hydraulic system of the curing press opening and closing molds,and uses AMESim software to simulate and analyze the hydraulic system of the opening and closing molds.Research has found that the hydraulic system for opening and closing the mold of a vulcanizing machine using a quantitative pump and throttle speed control circuit has significant throttling and overflow losses during the slow opening and closing processes,resulting in low system volumetric efficiency.The above conclusions provide theoretical and technical references for the design and optimization of the hydraulic system of the curing press.

关 键 词：硫化机 开合模 液压系统 节流调速 AMESIM 

分 类 号：TQ330.47[化学工程—橡胶工业]