连续酸洗产品表面划伤缺陷分析与控制研究  

Analysis and control of scratch defects on the surface of continuous pickling products

作　　者：李丹 龚勇飞 LI Dan;GONG Yongfei(Cold Rolling Plant,Shanghai Meishan Iron&Steel Co.,Ltd.,Nanjing 210039,Jiangsu,China)

机构地区：[1]上海梅山钢铁股份有限公司冷轧厂,江苏南京210039

出　　处：《宝钢技术》2023年第2期14-18,共5页Baosteel Technology

摘　　要：针对连续酸洗机组带钢表面划伤缺陷产生的原因进行研究,确定了工艺段张力、带钢下垂度、焊缝过拉矫模式、设备管理模式等关键因子,提出了相关改进措施,经验证有效改善了划伤情况,缺陷降级率由0.15%降低至0.06%以下,取得了显著改善效果。By studying the causes of the strip surface scratch defects in the continuous pickling unit,the key factors such as the tension of the process section,the droop of the strip,the mode of weld passing through the tension leveler,and the equipment management mode were determined,and then the relevant improvement measures were put forward.It has been proved that the scratch condition has been improved effectively,and the defect degradation rate has been reduced from 0.15%to less than 0.06%,which has achieved a remarkable improvement effect.

关 键 词：连续酸洗 划伤缺陷 酸槽 

分 类 号：TG335.11[金属学及工艺—金属压力加工]