基于反射系数谱相关系数的电缆故障检测方法  

Detection method of cable fault based on correlation coefficient of reflection coefficient spectrum

作　　者：刘鹏程 田立斌[2] 高磊 孟春旅 孙源 冯井普 陈运锐 林文 LIU Pengcheng;TIAN Libin;GAO Lei;MENG Chunlü;SUN Yuan;FENG Jingpu;CHEN Yunrui;LIN Wen(Hainan Power Grid Co.,Ltd.LeDong Power Supply Bureau,Ledong 572500,China;South China University of Technology,Guangzhou 510641,China)

机构地区：[1]海南电网有限责任公司乐东供电局,海南乐东572500 [2]华南理工大学,广东广州510641

出　　处：《绝缘材料》2023年第5期95-102,共8页Insulating Materials

基　　金：海南电网有限责任公司科技项目(071600KK52200001)。

摘　　要：频域反射法可以有效探测电缆中故障,但是传统的数据处理方法只能定位电缆中故障,而不能检测故障的阻抗状态。因此,本文提出了一种基于反射系数谱相关系数的电缆故障检测方法。首先设计对比函数,然后通过对比函数与反射系数谱构建相关系数的函数曲线,并利用该曲线中极值的位置与类型分别检测故障的位置与阻抗状态。最后对含故障的10 kV电力电缆开展仿真研究,并对含故障的60 m 10 kV电力电缆开展实验研究。仿真与实验结果表明:基于反射系数谱相关系数的电缆故障检测方法对电缆故障的定位精度较高,并且可以准确检测故障的阻抗状态。The frequency domain reflection method can effectively detect the fault in cable,but the traditional methods can only locate the fault in cable and can not detect the impedance state of the fault.Therefore,we proposed a cable fault detection method based on the correlation coefficient of reflection coefficient spectrum in this paper.Firstly,the comparison function was designed,then the function curve of correlation coefficient was constructed by comparing the function and reflection coefficient spectrum,and the position and type of the extreme value in the function curve were used to detect the position and impedance state of fault,respectively.At last,a 10 kV power cable with fault was conducted simulation research and a 60 m of 10 kV power cable with fault was conducted experimental research.The simulation and experiment results show that the cable fault detection method based on correlation coefficient of reflection coefficient spectrum has high location accuracy on the cable faults,and it can accurately detect the impedance state of fault.

关 键 词：电缆故障 反射系数谱 相关系数 故障定位 阻抗状态 

分 类 号：TM246[一般工业技术—材料科学与工程]