熔融液柱与冷却剂作用中液柱碎化预测  

Prediction of Jet Fragmentation in Molten Jet and Coolant Interaction

作　　者：李爽岚 刘鹏飞[1] 贺隆坤 匡波[1] LI Shuanglan;LIU Pengfei;HE Longkun;KUANG Bo(School of Nuclear Science and Engineering,Shanghai Jiao Tong University,Shanghai 200240,China)

机构地区：[1]上海交通大学核科学与工程学院,上海200240

出　　处：《原子能科学技术》2023年第5期988-997,共10页Atomic Energy Science and Technology

基　　金：国家科技重大专项(2016-DGB-I-KYSC-0015)。

摘　　要：液柱碎化是熔融物和冷却剂相互作用(FCI)粗混合阶段的关键物理现象,在安全分析时需建立液柱碎化模型。本文将实验验证和理论分析相结合,开展了高温熔融液柱与冷却剂相互作用实验;建立了不同沸腾条件下的液柱表面膜态沸腾模型和液柱表面不稳定波生长模型;再考虑不稳定波断裂和熔融物的脱离,构建起完整的熔融液柱水力学碎化模型。用该水力学碎化模型对不同沸腾条件下的熔融液柱碎化行为进行了预测。预测结果表明,实验得到的碎片中位直径和碎裂长度与模型预测结果符合较好,且能进一步应用于典型反应堆原型材料FCI实验的液柱碎化预测。The fuel coolant interaction(FCI)may lead to a steam explosion during a severe accident in a nuclear power plant,which poses a threat to the core components,pressure vessel,and even the reactor containment integrity.However,the fuel coolant interaction is a complex multiphase flow process involving coupled heat and mass transfer and energy conversion phenomena,some physical mechanisms remain to be studied.Jet fragmentation is the key physical phenomenon in the pre-mixing phase during FCI progress,and it greatly enhances the possibility of steam explosion and has a profound influence on the explosion intensity after steam explosion.Thus prediction models of jet fragmentation are very important in the nuclear safety analysis.Based on the molten jet fragmentation mechanism test and theoretical analysis,this paper proposes a jet fragmentation prediction model,and further completes the jet fragmentation prediction and validation by some typical reactor prototype materials FCI tests.In this paper,an experimental apparatus named test for interaction of melt with coolant(TIMELCO)was built to study the molten jet fragmentation behavior of molten tin and stainless steel jets falling into the water.Through the high-speed photography observation,the superheat of the jet and the subcooling of coolant directly change the boiling state of the melt jet,thus changing the jet fragmentation progress.In addition,debris median diameter and breakup length were obtained to gain a deeper understanding of the molten jet fragmentation process.Based on key test phenomena and experimental results,the mechanisms of jet fragmentation under different film boiling conditions were proposed.The model of film boiling on a jet surface was established under different film boiling conditions which consist of laminar flow film boiling and turbulent flow film boiling.Then the model of unstable wave growth on the jet surface was established considering the double interfaces with jet-steam interface and steam-water interface based on the Kelvin-Helmholtz

关 键 词：液柱碎化 膜态沸腾 不稳定波断裂 燃料和冷却剂相互作用 

分 类 号：TL334[核科学技术—核技术及应用]