快堆堆芯单排组件抗震计算关键算法研究与验证  

Research and Validation on Key Algorithm in Seismic Analysis for Single Row Assemblies of Fast Reactor

作　　者：周世安 黑宝平[1] 高付海[1] ZHOU Shian;HEI Baoping;GAO Fuhai(China Institute of Atomic Energy,Beijing 102413,China)

机构地区：[1]中国原子能科学研究院,北京102413

出　　处：《原子能科学技术》2023年第5期1024-1031,共8页Atomic Energy Science and Technology

摘　　要：快堆堆芯组件抗震分析是反应堆安全性评估的重要环节之一。为预测地震条件下快堆堆芯动力学响应,在综合考虑堆芯组件等效梁模型和多点非线性碰撞作用的基础上,本文建立了快堆堆芯抗震理论模型,构建了时程分析算法流程,并进行了相应的程序开发与测试,完成了计算模型与算法的测试验证以及IAEA所组织的快堆堆芯单排组件地震试验验证。结果表明:该程序模型与算法正确可行。本文为自主研发快堆全堆芯抗震程序奠定了理论基础。Seismic analysis of fast reactor core assembly is one of primary requirements for reactor safety assessment.Compared to conducting reactor seismic tests,analyzing by codes is more efficient with lower cost,the reason of which a fast reactor core seismic theory has been built up and a specific code for seismic analysis has been developed.The process of constructing seismic model is as follows.Firstly,fast reactor core assemblies are simplified as Euler beams and made use of GUYAN method to increase computation efficiency by freedom reduction.Then the first and second order frequency and damping ratio are utilized to calculate parameters of Rayleigh damping,a kind of structural damping,which connects with mass and stiffness matrixes.Finally,the collision behavior between assemblies is modeled by diagonal and non-diagonal term in stiffness and damping matrixes.The diagonal term presents influence of impact acting on the moving solid itself while the non-diagonal term presents influence of impact acting on the solid that impacts by the moving solid.The diagonal and non-diagonal term,which are named as impact stiffness in stiffness matrix and impact damping in damping matrix,are equal and opposite.Moreover,there are usually two ways to obtain impact stiffness:measurement in shock tests and simulation by finite element method,and the latter one was adopted in this paper.Through applying forces on faces of virtual assemblies modeled three-dimensionally in ANSYS,the extrusion stiffness is feasible to obtain.When the section area and structural strength of assemblies that mutually collided are equal,it can be deducted that the impact stiffness is equal to extrusion stiffness.And the impact damping derives from impact stiffness.During the procedure mentioned above,each term in reactor core assemblies dynamic equation was defined and deducted clearly,then the construction of the fast reactor core seismic model was completed.Meanwhile,an appropriate method was needed for solving the dynamic equation time-historically.Due to

关 键 词：快堆堆芯 抗震算法 IAEA验证 时程分析法 

分 类 号：TL352.1[核科学技术—核技术及应用]