应用于宽带ADC的三级CMOS运算放大器  

Three Stage CMOS Operational Amplifier Applied to Broadband ADC

作　　者：张州 ZHANG Zhou(Heilongjiang Vocational Institute of Ecological Engineering,Harbin 150025,China)

机构地区：[1]黑龙江生态工程职业学院智能装备学院,黑龙江哈尔滨150025

出　　处：《黑龙江生态工程职业学院学报》2023年第3期51-53,66,共4页Journal of Heilongjiang Vocational Institute of Ecological Engineering

摘　　要：为了提高模数转换器(ADC)的性能,增强其系统的稳定性,设计一款高增益的宽带运算放大器非常重要,多级运算放大器因为不受芯片供电电压的影响而成为了热门的选择。基于SMIC 0.18μm CMOS工艺设计了一款三级CMOS运算放大器,同时在Cadence软件的仿真环境下针对该三级运算放大器的性能参数进行了仿真。结果表明:在1.8 V电源电压的条件下,该三级运算放大器的增益达到了99.5 dB,单位增益带宽66 MHz,相位裕度69°,共模抑制比69 dB,电源电压抑制比95 dB,从结果来看,获得了更高的增益。In order to improve the performance of analog-to-digital converters(ADCs)and enhance the stability of their systems,it is crucial to design a high gain broadband operational amplifier.Multistage operational amplifiers have become a popular choice because they are not affected by chip supply voltage.Based on SMIC 0.18μm,A three-level CMOS operational amplifier was designed using the CMOS process,and its performance parameters were simulated in the simulation environment of Cadence software.The results show that under the condition of 1.8 V power supply voltage,the gain of the three-stage operational amplifier reaches 99.5 dB,the unit gain bandwidth is 66 MHz,the phase margin is 69°,the common mode rejection ratio is 69 dB,and the power supply voltage rejection ratio is 95 dB.From the results,the higher gain were obtained.

关 键 词：ADC CMOS 多级运算放大器 高增益 

分 类 号：TP342.1[自动化与计算机技术—计算机系统结构]