检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郑友卓 文蕾 付宇 杨忠 肖小兵 ZHENG Youzhuo;WEN Lei;FU Yu;YANG Zhong;XIAO Xiaobing(Electric Power Research Institute of Guizhou Power Grid Co Ltd,Guiyang 550002,China;Kaili Leishan Power Supply Bureau of Guizhou Power Grid Co Ltd,Kaili 556000,China;Xingyi Power Supply Bureau of Guizhou Power Grid Co Ltd,Xingyi 562400,China)
机构地区:[1]贵州电网有限责任公司电力科学研究院,贵州贵阳550002 [2]贵州电网有限责任公司凯里雷山供电局,贵州凯里556000 [3]贵州电网有限责任公司兴义供电局,贵州兴义562400
出 处:《传感器与微系统》2023年第5期100-102,107,共4页Transducer and Microsystem Technologies
基 金:贵州电网有限责任公司科技项目(066600KK52180058)。
摘 要:针对配电自动化系统中引入不同的软件、硬件设备可能导致的配电自动化系统软件、硬件不兼容与通信故障问题,提出了一种智能配电网模拟测试系统用于配电自动化终端设备测试。该平台采用信息物理系统,通过对多种智能设备与智能操控平台进行集成,构建了配电网模拟网络在各类故障情况下的动态模拟测试系统,以实现对配电自动化系统中各类设备进行测试。以配电网络中配电线路断路为案例进行了测试,实验结果表明:所提出的智能配电网模拟测试系统能够通过接入的不同智能终端设备,能快速识别断路故障并实现断路线路定位,且能够快速切除故障线路,证明本文所提出的系统可以用于配电自动化终端设备测试。Aiming at the problems of software and hardware incompatibility and communication failure of distribution automation system that may be caused by introducing different software and hardware equipment into distribution automation system,an intelligent distribution network simulation test system for distribution automation terminal equipment testing is proposed.The platform adopts a cyber-physical system,and through the integration of a variety of intelligent equipment and intelligent control platform,a dynamic simulation test system of the distribution network simulation network under various fault conditions is constructed to realize the detection of various equipment in the distribution automation system.A case study of the disconnection of the distribution line in the distribution network is carried out.The experimental results show that the proposed intelligent distribution network simulation test system can quickly identify the disconnection fault and realize the disconnection line localization through the access of different intelligent terminal equipment.It can quickly remove the faulty line,which proves the proposed system can be used for the test of distribution automation terminal equipment.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49