酸催化原位法环氧化丁基橡胶的制备  

Preparation of exopy isobutylene isoprene rubberby acid-catalyzed in-situ method

作　　者：高寒 冯宗泽 陈铁龙 焦奕翔 石艳[1] GAO Han;FENG Zongze;CHEN Tielong;JIAO Yixiang;SHI Yan(Beijing University of Chemical Technology,Beijing Key Laboratory of Preparation and Processing of New Polymer Materials,Beijing 100029,China;Shandong Chambroad Sinopoly New Material Co.,Ltd,Binzhou 256500,China;School of Materials Science and Engineering,Jilin University,Changchun 130000,China)

机构地区：[1]北京化工大学北京市新型高分子材料制备与加工重点实验室,北京100029 [2]山东京博中聚新材料有限公司,山东滨州256500 [3]吉林大学材料科学与工程学院,吉林长春130000

出　　处：《弹性体》2023年第1期11-15,共5页China Elastomerics

摘　　要：以正己烷为溶剂,分别以硫酸、对甲苯磺酸为催化剂对丁基橡胶进行原位环氧化改性,考察了催化剂用量、反应温度、反应体积以及原料的配比对环氧化反应的影响。结果表明,两种酸均有明显催化作用,此外,温度提高和体系放大均可提升反应速率。在此基础上确定出合成环氧化丁基橡胶的反应条件,并制备出环氧化度达到96%以上的环氧化丁基橡胶。The in-situ epoxidation of isobutylene isoprene rubber was performed with n-hexane as the solvent and sulfuric acid and p-toluenesulfonic acid as the catalysts,respectively.The effects of catalyst dosage,reaction temperature,reaction volume and the ratio of raw materials on the epoxidation reaction were investigated.The results showed that both two acids had significant catalytic effects.In addition,the reaction rate could be improved by increasing the temperature and reaction volume.On this basis,the reaction conditions for the synthesis of epoxidized isobutylene isoprene rubber(EIIR)were determined,and EIIR with an epoxidation degree of more than 96%was prepared.

关 键 词：丁基橡胶 环氧化 硫酸 对甲苯磺酸 

分 类 号：TQ333.6[化学工程—橡胶工业]