Effect of die structure parameters on deformation behavior of bent tube in free bending process  

作　　者：Wei Wang Cheng Cheng Li Wan Jie Tao Xun-zhong Guo Chun-mei Liu 

机构地区：[1]College of Material Science and Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 211100,Jiangsu,China [2]State Key Laboratory of Digital Manufacturing Equipment and Technology,Huazhong University of Science and Technology,Wuhan 430074,Hubei,China [3]Capital Aerospace Machinery Corporation,Beijing 100076,China

出　　处：《Journal of Iron and Steel Research International》2023年第3期487-503,共17页

基　　金：The investigation was supported from the Opening Project of State Key Lab of Digital Manufacturing Equipment&Technology(No.DMETKF2021004);the National Natural Science Foundation of China(Nos.52105360,U1937206,and 52175328);2021 Jiangsu Shuangchuang Talent Program(JSSCBS20210157);Fundamental Research Funds for the Central Universities(No.NS2022061).

摘　　要：The bending section of tube between the bending die and the guider is in a less constrained state during the free bending process.The free bending dies have the important impact on the plastic deformation behavior and the forming quality of tube.To study the evolution law of the deformation behavior of tube with the die structure parameters and optimize the free bending die parameters,the free bending experiments and the corresponding numerical simulations were carried out.The design principle of free bending die was illustrated.The free bending experiment was conducted to verify the reliability of the numerical simulation method.Based on the numerical simulation results,the influence of the distance between the center point of bending die and the front end of guider on the forming quality of bent tube is more obvious than that of the fillet of guider.However,the fillet of bending die hardly affects the stress and strain distribution and the evolution of the wall thickness.Finally,the free bending experiments with the newly determined free bending dies were conducted.The ultimate bending radius of bent tube is reduced and the forming quality is improved.

关 键 词：Free bending Die structure parameter Forming quality Numerical simulation TUBE 

分 类 号：O34[理学—固体力学]