检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:杨玉龙 毛恒博 成旭 邹俐俨 Yang Yulong;Mao Hengbo;Cheng Xu;Zou Liyan(The Twelfth Oil Production Plant of Changqing Oilfield Company,Qingyang 745400,China)
机构地区:[1]长庆油田分公司第十二采油厂,甘肃庆阳745400
出 处:《黑龙江科学》2023年第8期119-121,共3页Heilongjiang Science
摘 要:针对合水油田庄XX区长8储层油井“微裂缝+高渗带”水淹现状,结合储层地质特点、动态开发特征等因素,开展堵水和原层补孔压裂技术相结合的储层改造试验。庄XX区长8平均油层厚度17.9 m,平均射孔段6.4 m,储层整体打开程度较低,为35.7%,这为“堵水和原层补孔压裂”提供了基础条件。2019—2021年,堵水压裂实践表明,在升压1~2 MPa、酚醛树脂体系、堵剂用量650 m 3条件下,效果较好,原层压裂改造参数为小排量1.6~1.8 m 3/min、低砂比20%、低砂量16~20 m 3,可达到控水增油目的。此方法充分发挥了油藏潜力,为同类油藏高含水井治理提供了借鉴与指导。According to the water logging situation of“microfracture+hypertonic zone”of long 8 reservior oilfield in Zhuang XX Area of Heshui Oilfield,and through combining with the factors of reservoir geologic and dynamic development characteristics,the study does reservoir reconstruction test combining water plugging and original hole filling fracturing technology.The average reservoir thickness of Zhuang XX Area long 8 is 17.9 m,and average length of perforation section is 6.4 m.The opening degree of the reservoir is low,accounting for 35.7%.This provides the basic conditions for“water plugging and fracturing of the original layer”.Water plugging fracturing practice from 2019 to 2021 shows that the effect is good under boost 1~2 MPa,phenolic resin system,and plugging agent amount of 650 m 3 condition.And water controlling and oil increasing is achieved under the condition of fracturing parameters of original formation of small-displacement 1.6~1.8 m 3/min,low sand ratio 20%,low sand amount 16~20 m 3.This method gives full play to the reservoir potential and provides reference and guidance for the treatment of high water content wells in similar reservoirs.
分 类 号:TE34[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7