镍酸镧/铁酸镧复合制备与可见光光电性能  

Visible Light Photoelectric Properties of LaNiO 3/LaFeO 3 Composites Synthesized by Molten Salt Method

作　　者：吴洁 程惠婷 唐培松 毕辉[3] 刘战强 WU Jie;CHENG Huiting;TANG Peisong;BI Hui;LIU Zhanqiang(School of Engineering,Huzhou University,Huzhou 313000,China;Huzhou Key Laboratory of Environmental Functional Materials and Pollution Control,Huzhou 313000,China;Shanghai Institute of Ceramic,Chinese Academy of Sciences,Shanghai 200050,China)

机构地区：[1]湖州师范学院工学院,浙江湖州313000 [2]湖州市环境功能材料与污染治理重点实验室,浙江湖州313000 [3]中国科学院上海硅酸盐研究所,上海200050

出　　处：《湖州师范学院学报》2023年第4期51-57,共7页Journal of Huzhou University

基　　金：国家自然科学基金项目(51972326);湖州市自然科学基金项目(2021YZ17)。

摘　　要：采用熔盐法,以不同比例复合同系列镧系钙钛矿镍酸镧(LaNiO3)和铁酸镧(LaFeO3),通过测试光电化学响应,研究该复合材料的可见光光电性能,以及LaNiO3/LaFeO3薄膜厚度对其光电性能的影响.研究结果显示,当以LaNiO3为衬底时,LaFeO3涂层厚度对电极整体的影响较大,且当LaFeO3涂层厚度在最优时,其光响应比单一的LaNiO3电极提升近5倍.In this paper,LaNiO 3/LaFeO 3 composites in different proportions were prepared by molten salt method.The visible light photoelectric properties of the composites were explored,and the effects of relevant parameters on the visible light photoelectric properties of the materials were studied.The effects of LaNiO 3/LaFeO 3 film thickness on its photoelectric properties were also studied.When LaNiO 3 was used as the substrate,the thickness of the LaFeO 3 coating has a great influence on the overall electrode.And as the LaFeO 3 coating reaches to 600μg/cm 2,the light response is nearly 5 times higher than that of a single LaNiO 3 layer.

关 键 词：铁酸镧 镍酸镧 熔盐法 复合材料 光电性能 

分 类 号：TB321[一般工业技术—材料科学与工程]