金刚石钻进技术指标综合研究及其计算机控制  

Comprehensive research on technical indexes in diamond drilling and their computer control

作　　者：汤凤林 赵荣欣[1] Нескоромных B.B.[3] 李博 周欣[4] 段隆臣 TANG Fenglin;ZHAO Rongxin;NESKOROMNYH V.V.;LI Bo;ZHOU Xin;DUAN Longchen(Shanghai Institute of Building Sciences Limited Company,Shanghai 200032,China;Faculty of Engineering,China University of Geosciences,Wuhan Hubei 430074,China;Siberian Federal University,City Krasnoyrsk 660095,Russia;Hubei Earthquake Agency,Wuhan Hubei 430064,China)

机构地区：[1]上海市建筑科学研究院有限公司,上海200032 [2]中国地质大学(武汉)工程学院,湖北武汉430074 [3]Сибирскийфедеративныйуниверситет,г.Красноярск660095,Россия [4]湖北省地震局,湖北武汉430064

出　　处：《钻探工程》2023年第3期1-7,共7页Drilling Engineering

基　　金：国家自然科学基金面上项目“液压冲击回转作用下热压WC-Cu基孕镶金刚石钻头的磨损行为研究”(编号:41972327)。

摘　　要：钻探工程施工目前通常是凭经验进行。应该改变这种情况,把凭经验施工转变到依靠科学施工上来。俄罗斯钻探专家提出把金刚石钻进中的机械钻速、钻头每转进尺和单位进尺能耗量3个参数综合起来研究,开发了控制钻进过程最优化的软件,经试用,取得了良好的效果,值得我们借鉴。Drilling engineering is a heavy physical work.At present majority does it basically by experience.That situation should be changed,the drilling by experience should be changed up to the science.Russian drilling specialists have proposed comprehensive research on the three indexes,i.e.rate of penetration,bit penetration rpm and energy consumption per meter in diamond drilling and developed a software controlling optimization of drilling process.Good results have been obtained by using the software and it is worth for us to learn from.

关 键 词：金刚石钻进 机械钻速 钻头每转进尺 单位进尺能耗量 最优化软件 

分 类 号：P634.5[天文地球—地质矿产勘探] TE242[天文地球—地质学]