锻铣工具活塞力在套管锻铣中的作用分析  

Function Analysis of Piston Force in Casing Forging and Milling

作　　者：刘景超 黄毓祥 魏臣兴 林铁军[3] LIU Jingchao;HUANG Yuxiang;WEI Chenxing;LIN Tiejun(Drilling&Production Branch,CNOOC Energy Technology&Services Limited,Tianjin 300452,China;Guangdong University of Petrochemical Technology,Maoming 525000,China;State Key Lab of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu 610500,China)

机构地区：[1]中海油能源发展股份有限公司工程技术分公司,天津300452 [2]广东石油化工学院,广东茂名525000 [3]西南石油大学“油气藏地质及开发工程”国家重点实验室,成都610500

出　　处：《机械工程师》2023年第6期85-87,共3页Mechanical Engineer

摘　　要：为了优化套管锻铣工具结构,对活塞及刀体等核心机构的作用力传递关系进行充分分析,采用理论计算及有限元仿真两种计算方法,建立了活塞推力与单翼刀体和套管之间接触力的定量关系公式,并分析了活塞推力对套管局部屈服的影响。结果表明,随着活塞上的压力不断增加,接触反力和施加的活塞推力是线性关系,两者比值约为1:3,并且活塞推力对套管材料局部屈服的影响并不明显,在套管锻铣工具设计中,优先选择合适的节流喷嘴,使产生的活塞载荷能够确保工具在套管上不打滑即可,然后在转矩和钻压作用下,刀体就可切削套管。该研究为套管锻铣工具后续节流喷嘴尺寸的选择、工具施工参数的优选提供了理论依据。In order to optimize the structure of tool,the force transmission relation between the piston and cutter body is fully analyzed,and the quantitative relation model between piston thrust and contact force between single blade cutter body and casing is established by theoretical calculation and finite element simulation.On this basis,the effect of piston thrust on local yield of casing is analyzed.The results show that the contact reaction force and the applied piston thrust is a linear relationship with pressure acting on piston increasing,and the ratio is about 1:3.Meanwhile,the influence of piston thrust on local yield of casing material is not obvious.In the design of casing forging and milling tool,the proper throttle nozzle is selected preferentially in order to ensure that the tool does not slip on the casing.On this basis,the cutter body can cut the casing effectively under the combined action of torque and weight on bit(WOB).This study provides a theoretical basis for the optimization of throttle nozzle sizes and construction parameters in casing forging and milling operations.

关 键 词：锻铣 刀体 有限元法 数值模拟 

分 类 号：TE242[石油与天然气工程—油气井工程]