检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:申鑫 张明庆 徐剑 程鹏[2] 龚顺风[2] SHEN Xin;ZHANG Ming-qing;XU Jian;CHENG Peng;GONG Shun-feng(PowerChina Huadong Engineering Co.Ltd.,Hangzhou 311122,China;Department ofCivil Engineering,Zhejiang University,Hangzhou 310058,China)
机构地区:[1]中国电建集团华东勘测设计研究院有限公司,杭州311122 [2]浙江大学土木工程学系,杭州310058
出 处:《工程建设与设计》2023年第9期73-77,共5页Construction & Design for Engineering
摘 要:支墩通常布置在两个镇墩之间起到支撑管道的作用,防止管道输水时因重量变大造成结构变形。论文选取了白鹤滩水电站枢纽工程邓家坡段输水管道中的一段管道,利用有限元软件ANSYS对管道进行了建模分析,研究了支墩位移对管道内力的影响。结果表明:单支墩沉降量达到L/250(L为支墩间距)时,管道最大应力增加140%,最大弯矩增加332%;单支墩侧移量达到L/250时,管道最大应力增加144%;靠近镇墩附近的支墩沉降和侧移对管道内力影响最大,支墩间隔发生位移对管道内力更为不利。Support is generally arranged between two anchor blocks to support the role ofthe pipeline,to prevent deformation ofthe structure caused bythe large weight ofthe pipeline when itis transporting water.In this paper,a section ofwater pipeline in Dengjiapo section ofBaihetan Hydropower Station Project is selected,and the finite element sofware ANSYS is used to carry out the modeling analysis of the pipeline.The influence of support spacing and support displacement on the internal force of the pipeline is studied.The results show that when the settlement of a single support reaches L/250(L is the support spacing),the maximum stress and bending moment of the pipeline increase by 140%and 332%,respectively.When the lateral displacement ofa single support reaches L/250,the maximum stress ofthe pipeline increases by 144%.The settlement and lateral displacement of the support near the anchor block has the greatest impact on the internal force of the pipeline,and the discontinuous displacement of supports is more unfavorable to the internal forceofthe pipeline.
分 类 号:TV512[水利工程—水利水电工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.43