3D打印滑动钛板固定不稳定性寰椎骨折  

3D printed sliding titanium plate for internal fixation of unstable atlas fractures

作　　者：高冰 都金鹏 冯铭哲 黄小强 贺宝荣[2] GAO Bing;DU Jin-peng;FENG Ming-zhe;HUANG Xiao-qiang;HE Bao-rong(Shaanxi University of Chinese Medicine,Xianyang 712046,China;Department of Spinal Surgery,Xi'an Red Cross Hospital,Xi'an Jiaotong University,Xi'an 710054,China;Department of Orthopedics,Xi'an Fifth Hospital,Xi'an 710082,China)

机构地区：[1]陕西中医药大学,陕西咸阳712046 [2]西安交通大学附属红会医院脊柱外科,陕西西安710054 [3]西安市第五医院骨科,陕西西安710082

出　　处：《中国矫形外科杂志》2023年第8期730-733,共4页Orthopedic Journal of China

基　　金：中医药传承创新暨“秦药”开发重点科学研究项目(编号:2021-02-22-016);陕西省卫生健康科研基金项目(编号:2022A004);西安市科技计划项目(编号:21YXYJ0024)。

摘　　要：[目的]介绍3D打印滑动钛板固定不稳定型寰椎骨折的手术技术和初步临床效果。[方法] 2018年4月—2021年4月,对9例不稳定型寰椎骨折患者采用3D打印个性化滑动钛板行内固定术。术前行上颈椎薄层CT扫描,采用Mimics软件中重建三维模型,导入Geomagic Studio软件捕获所得三维扫描数据,设计个性化C1后侧滑动钛板,3D打印实体。全麻下行颈椎后侧切口,显露C1后弓,建立椎弓钉道,放置3D打印滑动钛板,置入椎弓钉固定,调整滑动钛板,达到骨折复位和加压固定。[结果]所有患者均顺利完成手术,无严重并发症,手术时间平均(66.5±7.3) min;术中失血量平均(92.5±27.3) ml。患者均获12~18个月随访,与术前相比,末次随访时VAS评分[(7.1±1.6) vs (1.8±1.0), P<0.05]、JOA评分[(8.7±6.0) vs (16.3±4.7), P<0.05]均显著改善。影像方面,所有患者螺钉置入位置准确,螺钉均未突破骨皮质,Neo评级标均为0级,骨折复位满意。至末次随访,所有患者骨折均骨性愈合,未见内固定无松动、断裂。[结论] 3D打印滑动钛板内固定不稳定型寰椎骨折技术可行,安全高效。[Objective]To introduce the surgical technique and preliminary clinical outcomes of 3D printed sliding titanium plate for fixation of unstable atlas fracture.[Methods]From April 2018 to April 2021,9 patients received open reduction and internal fixation with 3D printed personalized sliding titanium plate for unstable atlas fractures.As thin-layer CT scan of the upper cervical vertebra was per⁃formed before surgery,the 3D model of upper cervical spine was reconstructed using the Mimics software,and then the data captured by the Geomagic Studio software to design the C1 posterior sliding titanium plate,finally the real personalized sliding plate was made by the 3D printer.The posterior cervical incision was made under general anesthesia to expose the posterior arch of C1,establish the vertebral arch screw path.The 3D printed sliding titanium plate was placed to fit the posterior arch,and then insert the screw in proper length.As adjust⁃ing the plate sliding,the fracture reduction and compressive fixation were finished.[Results]All patients were successfully operated on without serious complications,whereas with operation time of(66.5±7.3)min and intraoperative blood loss of(92.5±27.3)ml,and followed up for 12~18 months.Compared with those preoperatively,the VAS scores[(7.1±1.6),(1.8±1.0),P<0.05],JOA score[(8.7±6.0),(16.3±4.7),P<0.05]improved significantly at the latest follow-up.Radiographically,all patients had screw placed properly on images,without screw broken through the bone cortex,while with satisfactory fracture reduction.Up to the last follow-up,all patients got fractures healing without loosening or fracture of the implants.[Conclusion]The 3D printed titanium sliding plate for internal fixation of unstable atlas fracture is feasible,safe and efficient.

关 键 词：不稳定型寰椎骨折 3D打印滑动钛板 内固定 

分 类 号：R683.2[医药卫生—骨科学]