ZrAlNiCuCo非晶合金的组织及力学性能  

Microstructure and mechanical properties of ZrAlNiCuCo amorphous alloy

作　　者：刘钰鑫 蒲永亮 刘丛 丁静 朱胜利 LIU Yu-xin;PU Yong-liang;LIU Cong;DING Jing;ZHU Sheng-li(School of Materials Science and Engineering,Lanzhou Jiaotong University,Lanzhou 730070,China;School of Materials Science and Engineering,Tianjin University,Tianjin 300350,China;Tianjin Key Laboratory of Composite and Functional Materials,Tianjin 300350,China)

机构地区：[1]兰州交通大学材料科学与工程学院,甘肃兰州730070 [2]天津大学材料科学与工程学院,天津300350 [3]天津市材料复合与功能化重点实验室,天津300350

出　　处：《材料热处理学报》2023年第5期104-111,共8页Transactions of Materials and Heat Treatment

基　　金：甘肃省自然科学基金(20JR10RA256);兰州交通大学-天津大学联合创新基金(2021051);兰州交通大学青年科学基金(220278)。

摘　　要：采用电弧熔炼-铜辊甩带法制备Zr_(50)Al_(5)Ni_(15-x)Cu_(15)Co_(15+x)(x=2、4和6 at%)非晶合金条带,使用X射线衍射(XRD)、差示扫描量热仪(DSC)、扫描电镜(SEM)、透射电镜(TEM)及万能力学试验机等研究了样品厚度、合金成分以及热处理工艺对其微观结构、相组成、热稳定性和拉伸力学性能的影响。结果表明:Zr_(50)Al_(5)Ni_(15-x)Cu_(15)Co_(15+x)(x=2,4,6 at%)合金条带为非晶态,退火后非晶基体上析出简单立方结构的CoZr和CuZr纳米晶。在相同样品厚度下,随着Ni含量的减小,合金的室温拉伸塑性增加;随着条带厚度的增加,合金的室温拉伸塑性逐渐增加。其中,51μm厚的Zr_(50)Al_(5)Ni_(9)Cu_(15)Co_(21)合金条带经513℃退火1800 s后,室温拉伸塑性最高可达7.3%,抗拉强度为370.6 MPa。Zr_(50)Al_(5)Ni_(15-x)Cu_(15)Co_(15+x)(x=2,4 and 6 at%)amorphous alloy ribbons were prepared by arc melting and melt-spinning method.The effects of sample thickness,alloy composition and heat treatment process on microstructure,phase composition,thermal stability and tensile mechanical properties of the alloy ribbons were studied by means of X-ray diffraction(XRD),differential scanning calorimetry(DSC),scanning electron microscopy(SEM),transmission electron microscopy(TEM)and universal mechanical testing machine.The results show that the Zr_(50)Al_(5)Ni_(15-x)Cu_(15)Co_(15+x)(x=2,4 and 6 at%)alloy ribbons are amorphous,and CoZr and CuZr nanocrystals with simple cubic structure precipitate in the amorphous matrix after annealing.At the same sample thickness,the room temperature tensile plasticity of the alloy samples increases with the decrease of Ni content;with the increase of ribbons thickness,the room temperature tensile plasticity of the alloy samples increases gradually.After annealing at 513℃for 1800 s,the maximum tensile plasticity at room temperature of the Zr_(50)Al_(5)Ni_(9)Cu_(15)Co_(21)alloy ribbon with thickness of 51μm can reach 7.3%,and the tensile strength is 370.6 MPa.

关 键 词：ZR基非晶合金 组织 热稳定性 力学性能 

分 类 号：TG139.8[一般工业技术—材料科学与工程]