长循环高电压钠离子电池正极材料P2-Na_(2/3)Mn_(1/3)Bi_(1/3)Ni_(1/3)O_(2)的合成及性能  

Synthesis and properties of P2-Na_(2/3)Mn_(1/3)Bi_(1/3)Ni_(1/3)O_(2)as long-life and high voltage sodium-ion battery cathode

作　　者：马腾跃 安金玲 张鹏 刘进荣[1] 何伟艳[1] MA Teng‑Yue;AN Jin‑Ling;ZHANG Peng;LIU Jin‑Rong;HE Wei‑Yan(School of Chemical Engineering,Inner Mongolia University of Technology,Hohhot 010051,China)

机构地区：[1]内蒙古工业大学化工学院,呼和浩特010051

出　　处：《无机化学学报》2023年第6期1023-1030,共8页Chinese Journal of Inorganic Chemistry

基　　金：内蒙古自治区直属高校基本科研业务费项目资助。

摘　　要：镍基层状氧化物NaNiO_(2)钠离子电池材料具有高电压和高容量的特性,且制备方法较为简单,但姜-泰勒(Jahn-Teller)效应使其在高倍率循环下容量较低以及在高电压(4.5 V)下无法稳定循环。通过调节溶胶-凝胶工艺的条件,设计、合成了Na_(2/3)Mn_(1/3)Bi_(1/3)Ni_(1/3)O_(2)片层状金属氧化物,并将其作为正极活性材料,在空气环境中组装成钠离子电池,进行电化学测试,考察Bi、Mn掺入量对电池电化学影响。研究结果表明:当金属Mn和Bi共掺时,在1.2~4.5 V宽电压范围内,电池在循环50周后容量为90.39 mAh·g^(-1)。在2.0~4.0 V电压范围内1.0C(115 mA·g^(-1))倍率下恒流充放电50周后的容量保持率为96.96%,循环850周后的保持率为80.15%,具有良好的循环稳定性和安全性。Layered nickel-based cathode materials are of great interest due to their high voltage and specific capacities for sodium ion batteries.However,the Jahn-Teller effect is detrimental for achieving considerable cycling stability at high voltage(4.5 V)and rate capability.Herein,a P2-type Na_(2/3)Mn_(1/3)Bi_(1/3)Ni_(1/3)O_(2)cathode material was synthesized by adjusting the process conditions of sol-gel,and used as positive active materials to assemble sodium ion battery in air environment.The improved cycling and rate performance under high voltage can be achieved by Mnsubstitution and Bi-substitution.In a wide voltage range of 1.2 to 4.5 V,the material maintained a specific discharge capacity of 90.39 mAh·g^(-1)after 50 cycles.The cathode obtained a remarkable capacity retention of 96.96%after 50 cycles at 1C(115 mA·g^(-1))and 80.15%capacity retention up to 850 cycles from 2.0 to 4.0 V.The above data indicate that the cathode materials own an extremely long cycling life and better rate capability.

关 键 词：钠离子电池 镍基氧化物 锰掺杂 铋掺杂 电化学性能 

分 类 号：O646.21[理学—物理化学]