氧化铁纳米颗粒/紫外降解合成石油废水的研究  

Synthesis of Iron Oxide Nanoparticles for UV Degradation of Petroleum Wastewater

作　　者：凌勇 LING Yong(CPC(Xinjiang)Petroleum Engineering Co.,Ltd.,Xinjiang 830000,China)

机构地区：[1]中油(新疆)石油工程有限公司,新疆830000

出　　处：《精细化工中间体》2023年第2期76-78,83,共4页Fine Chemical Intermediates

摘　　要：用硼氢化钠还原氯化铁溶液合成了氧化铁纳米颗粒(IONPs),紫外条件下,IONPs降解合成石油废水,经化学需氧量(COD)测定法评价降解量。结果表明,IONPs/UV对合成石油废水COD的去除效果优于紫外线光单独处理。p H为8的UV光和0.8 g IONPs的组合可以使COD去除率达95.5%。IONPs/UV降解合成石油废水的速度比纯紫外光快1.3~2.0倍。IONPs/UV对合成石油废水COD的去除符合准一级动力学模型,速率常数k在0.013 3~0.026 9 min^(-1)范围。Iron oxide nanoparticles (IONPs) were synthesized by reducing ferric chloride solution with sodium borohydride.The IONPs and UV light were used to degrade synthetic petroleum wastewater.The degradation amount was evaluated by chemical oxygen demand (COD) measurement.The results showed that IONPs/UV had better removal effect on COD of synthetic petroleum wastewater than UV alone.The combination of UV light at p H 8and IONPs at 0.8 g could achieve a COD removal rate of 95.5%.The IONPs/UV degradation rate of synthetic petroleum wastewater was 1.3~2.0 times faster than that of pure UV light.The removal of COD from synthetic petroleum wastewater by IONPs/UV accords with the quasi-first-order kinetic model,with a rate constant k ranging from 0.013 3 to 0.026 9 min^(-1).

关 键 词：氧化铁纳米颗粒 光催化 石油废水 

分 类 号：X74[环境科学与工程—环境工程]