检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王宁波[1,2] 黄云峰 肖柏军 李忠[1,2] 赵雨森 WANG Ningbo;HUANG Yunfeng;XIAO Baijun;LI Zhong;ZHAO Yusen(School of Civil Engineering,Central South University,Changsha 410075,China;Hunan Tieyuan Civil Engineering Testing Co.,Ltd.,Changsha 410075,China)
机构地区:[1]中南大学土木工程学院,湖南长沙410075 [2]湖南铁院土木工程检测有限公司,湖南长沙410075
出 处:《铁道科学与工程学报》2023年第5期1750-1760,共11页Journal of Railway Science and Engineering
基 金:国家自然科学基金资助项目(52078486)。
摘 要:基于桥梁转角响应易于获取的特点及桥梁影响线的准静态优势,以桥梁实际影响线精准提取前期研究为基础,提出一种结合桥梁梁端转角响应的损伤识别方法。针对梁式桥,结合实际转角影响线构建损伤定位指标,通过定位指标曲线局部峰值确定损伤位置。依此建立包含损伤信息的基函数,对实际转角影响线进行最小二乘拟合识别曲线系数,实现损伤定量。开展车辆过桥数值仿真研究,在20 m长简支梁模型上设置不同损伤工况,模拟二轴车过桥所致转角响应,考虑行车速度、路面平整度和测试噪声等因素影响,以此进行转角影响线的提取及损伤识别。结果表明,同等情况下损伤程度越大,识别结果偏差越小;相较2处损伤,单处损伤的定位更加准确。开展损伤识别模型试验,在5 m长试验梁不同位置处设置2处损伤,进一步进行损伤定位及定量研究。识别试验梁的损伤位置分别为2.09 m和3.05 m,损伤程度分别为0.31和0.47,均与实际值较为接近。上述研究表明:所构建的未损基函数及损伤基函数包含梁结构完整及损伤特征,结合当前状态下梁端转角响应可实现桥梁的损伤识别;损伤识别结果具备较高精度,可为直接利用梁端转角数据进行桥梁的损伤定位定量提供参考。As rotation response of bridge was easy to obtain and bridge influence line is quasi-static,a damage detection method combining rotation response of bridge beam end was put forward on the basis of previous research on accurate extraction of actual influence line of bridge.For beam bridges,the damage location index was constructed by combining actual rotation influence line,and the damage location was determined by the local peak value of the location index curve.According to this location,the basis function containing damage information was established.The actual rotation influence line was fitted with the least square.The curve coefficient was identified to realize the damage quantitation.Carry out the numerical simulation research of vehicle crossing the bridge,set different damage conditions on the 20 m long simply supported beam model,simulate the rotation response caused by two-axle vehicle crossing the bridge,and consider the influence of driving speed,pavement flatness,test noise and other factors.The rotation influence line was extracted,and the damage was identified.The results show that the larger damage degree under the same conditions,the smaller deviation of detection results.The location of single damage is more accurate than that of two damages.The damage detection model test is carried out and two damages are set at different locations of the 5 m long test beam for further damage location and quantitative research.The damage location of the identified test beam is 2.09 m and 3.05 m respectively.The damage degree is 0.31 and 0.47 respectively,which are close to the actual value.The above research shows the constructed basis function that both the undamaged and the damaged one contain the complete characteristics of beam,and the damage detection of bridge can be realized by combining the rotation response of beam end under the current state.The results of damage detection have high accuracy,which can provide a reference for the quantitative location of bridge damage by directly using the rotation of
关 键 词:损伤识别 梁端转角响应 移动荷载试验 转角影响线 基函数
分 类 号:TV45[水利工程—水工结构工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.19.54.41