小样织机织造棉/莱赛尔高支高密贡缎织物工艺探究  

Study on weaving technology of cotton/Lyocell high count and high density satin fabric with sample loom

作　　者：王建中 王海明 李兴华 徐云青 贾荣霞 毛桐桐 王海舟 WANG Jianzhong;WANG Haiming;LI Xinghua;XU Yunqing;JIA Rongxia;MAO Tongtong;WANG Haizhou(Binzhou Scientific and Technological Innovation Development Research Institute,Binzhou 256600,China;Key Laboratory of New Dyeing Technology in Short Process of Shandong Province,Binzhou 256617,China;Huafang Engineering Technology Research Institute Limited of Binzhou,Binzhou 256617,China;National Enterprise Technology Center,Huafang Co.Ltd.,Binzhou 256617,China)

机构地区：[1]滨州市科技创新发展研究院,山东滨州256600 [2]山东省短流程印染新技术重点实验室,山东滨州256617 [3]滨州华纺工程技术研究院有限公司,山东滨州256617 [4]华纺股份有限公司技术中心,山东滨州256617

出　　处：《染整技术》2023年第5期29-31,共3页Textile Dyeing and Finishing Journal

基　　金：2023年度省自然科学基金项目(ZR202211100035)。

摘　　要：为了充分发挥剑杆小样机在纺织新品种开发中的优势,以60%莱赛尔与40%棉贡缎织物为实验对象,分析高支高密贡缎布面疵点的形成原因,再分别对浆纱、整经、穿综筘、织造工序进行工艺优化,可以解决浆纱后纱线伸长率低、上浆率不匀、布面经缩起圈、跳纱和起楞的问题。In order to give full play to the advantages of rapier prototype in the development of new textile variet-ies,taking 60%Lyocell and 40%cotton satin fabrics as experimental objects,the causes of defects in high count and high density satin fabric are analyzed.Then,the processes of sizing,warping,heald reed and weaving are optimized respectively,solving the problems of low yarn elongation,uneven sizing rate,end snarl,float and wrinkle of cloth surface after sizing.

关 键 词：剑杆小样织机 高经密织物 莱赛尔 经缩起圈 

分 类 号：TS105[轻工技术与工程—纺织工程]